Reset
Showing 20 of 99 academic articles

Modular multi-fidelity simulation framework for advanced sail-driven spacecraft control and dynamics in perturbation-rich regimes

Celia Redondo-Verdú, Álvaro Belmonte-Baeza, José L. Ramón, Cristina Cachero et al. • Results in Engineering (2026)

This work presents a high-fidelity Software-in-the-Loop (SIL) simulation framework for the development and validation of control strategies for sail-driven spacecraft operating in Low Earth Orbit (LEO). The framework integrates NVIDIA Omniv...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rineng.2026.113314

Editorial

Bulent Cavas • Science Education International (2026)

Dear Readers, The September 2026 issue of Science Education International presents 11 original research articles authored by scholars from 11 countries, including Germany, Slovenia and Italy, Finland and South Africa, Brazil, Chile and Arge...

DOAJ Open Access (DOAJ) DOI: 10.33828/sei.v37.i4.e

Enhancing Design Ideation in Traditional Arabian Gulf Artifacts Through the Integration of Contemporary Three-Dimensional Manufacturing Methods

Rafat Saleh Madani • الاكاديمي (2026)

The contemporary designer analyzes and studies the elements of artistic heritage, to identify the intellectual and aesthetic premises that lie in its structure, its elements, its vocabulary, and its encapsulation. With the aim of enriching ...

DOAJ Open Access (DOAJ) DOI: 10.35560/jcofarts1765

A Probabilistic Fatigue Strength Assessment in AlSi-Cast Material by a Layer-Based Approach

Matthias Oberreiter, Stefan Fladischer, Michael Stoschka, Martin Leitner • Metals (2022)

An advanced lightweight design in cast aluminium alloys features complexly shaped geometries with strongly varying local casting process conditions. This affects the local microstructure in terms of porosity grade and secondary dendrite arm...

DOAJ Open Access (DOAJ) DOI: 10.3390/met12050784

Statistical Optimization of Medium for Pullulan Production by Aureobasidium pullulans NCPS2016 Using Fructose and Soybean Meal Hydrolysates

Jinyu Yang, Yanhao Zhang, Shuangzhi Zhao, Qingxin Zhou et al. • Molecules (2018)

Pullulan, with its excellent characteristics of film-forming, water solubility, and biodegradability, is attracting more and more attention in agricultural products preservation. However, high pullulan production cost largely restricts its ...

DOAJ Open Access (DOAJ) DOI: 10.3390/molecules23061334

Industrial sewing as a creative resource in the clothing Surface Design project

Ana Cláudia de Abreu, Marizilda dos Santos Menezes • ModaPalavra e-periódico (2022)

The production of clothing has several operational steps, such as industrial sewing, which is used on textile surfaces as a materialization resource, that is, the union of two or more layers of fabrics by sewing points that makes the object...

DOAJ Open Access (DOAJ) DOI: 10.5965/1982615x15352022249

A study of aerodynamic noise in air duct systems with turning vanes

Rašuo Boško, Dinulović Mirko, Trninić Marta, Stamenović Marina et al. • FME Transactions (2021)

Noise is becoming one of the problems in many industrial applications. In this paper the aerodynamic noise in air duct system that arises from air flow passing over a surface of turning vanes is investigated. Based on Proudman's formula usi...

DOAJ Open Access (DOAJ) DOI: 10.5937/fme2102308R

Research progress of automated ultrasonic imaging detection technology for complex aircraft components

CHEN Yao, XIONG Zhenghui, LUO Junwei, WANG Hanyang et al. • Journal of Aeronautical Materials (2025)

Traditional ultrasonic automated non-destructive testing is a great challenge in the inspection of aviation components with complex surfaces. Complex surfaces can interfere with the formation of the focus in the sound beam,and the waveform ...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1005-5053.2024.000173

Influence of Non - Condensable Gases on the Processes of Heat and Mass Transfer during Film Condensation of Steam in Heat Exchangers

Reshetnikov I.F., Shikhalev S.V., Tikhonov S.L. • Problems of the Regional Energetics (2018)

The aim of the article is a quantitative assessment of the influence of non-condensable gases on the intensity of heat and mass transfer processes during film condensation of steam in the specific conditions for heat exchanger. The task is ...

DOAJ Open Access (DOAJ) DOI: 10.5281/zenodo.2222362

Effect of Thermal Modification and Picture Varnish Application on Color Change of Scots Pine (Pinus sylvestris L.) Wood

Hüseyin Peker, Ümit Ayata, Göksel Ulay • Drewno (2025)

Scots pine wood represents one of the important tree species used by the wood processing industry in many countries for both interior and exterior applications. It is well known that thermal treatment alters the color of wood. To protect wo...

DOAJ Open Access (DOAJ) DOI: 10.53502/wood-201974

Formulation, characterization, and valorization of the antioxidant, antibiofilm, and anti-adhesion potentials of a clove essential oil nanoemulsion

Enis Ben Bnina, Jihen Missaoui, Mohamed Firas Gannouni, Lotfi Achour et al. • OpenNano (2026)

Food safety and control are fundamental public health issues that maintain consumer confidence and protection. This design (management) requires monitoring production, processing, and conservation processes while limiting microbiological, c...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.onano.2026.100286

Flat Plate based- Solar System with a tracking system

M. Abdunnabi, A. Abusalama, M. Algamil, M. Almontaser • Solar Energy and Sustainable Development (2018)

Water heating in Libyan domestic sector represents over 29% of the total electrical consumption. There is a great potential of hot water usage in the industrial and other sectors. Solar energy can play vital role in providing hot water to t...

DOAJ Open Access (DOAJ)

Recent progress in tailoring Ni-rich layered oxides via coating and doping strategies for enhanced lithium-ion battery performance

Ha Eun Kang, Seong-Do Kim, Young Soo Yoon, Sang-Jin Lee • Applied Surface Science Advances (2025)

Nickel-rich layered oxide cathodes, typified by compositions such as LiNi₁₋ₓ₋ᵧCoₓMnᵧO₂ (NCM) have garnered significant attention as high-energy-density candidates for next-generation lithium-ion batteries. However, their widespread deployme...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.apsadv.2025.100826

Thermodynamics and Kinetics in Materials Science

Boris S. Bokstein, Mikhail I. Mendelev, David J. Srolovitz • Oxford University Press eBooks (2005)

This text presents a concise and thorough introduction to the main concepts and practical applications of thermodynamics and kinetics in materials science. It is designed with two types of uses in mind: firstly for one or two semester unive...

OPENALEX DOI: https://doi.org/10.1093/oso/9780198528036.001.0001

Improved production of titanate nanotubes by hydrothermal method for adsorption of organic dyes

Ayman H. Zaki, Sara Adel, Mahmoud M. Abd El-hafiez, Ahmed A. Abdel-Khalek • Beni-Suef University Journal of Basic and Applied Sciences (2021)

Abstract Background Increasing the yield of nanomaterials using the same reactor size and fixing most of the reactants and conditions will greatly improve the production process by saving time, energy and efforts. Titanate nanotubes are mai...

DOAJ Open Access (DOAJ) DOI: 10.1186/s43088-021-00175-y

Hybrid coatings for orthopaedic implants formed by physical vapour deposition and microarc oxidation

Roman Gabor, Ladislav Cvrček, Martina Doubková, Václav Nehasil et al. • Materials & Design (2022)

This study is focused on the preparation of new hybrid layers intended for surface modification of Ti-6Al-4V alloys for potential orthopaedic and dental applications. Combination of the technology of physical vapour deposition (PVD) and sub...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2022.110811

Audience and Algorithm: A Causal Layered Analysis of the Future of “Autonomy”

Amir Garousi, Afshin Omidi, moslem shirvani naghani • مطالعات رسانه‌های نوین (2026)

Extended AbstractPurpose and Research ProblemIn the digital age, the relationship between audiences and algorithms has become a defining arena of cultural negotiation and epistemic transformation. This study explores the futures of autonomy...

DOAJ Open Access (DOAJ) DOI: 10.22054/nms.2026.88661.1910