Reset
Showing 12 of 12 academic articles

Scalable micro/nanostructured superhydrophobic surface modifications for enhanced energy efficiency and heat transfer performance in stainless steel and titanium

Younghun Shin, Kwon-Yeong Lee, Jeong-Won Lee, Woonbong Hwang • Materials Research Express (2023)

Condensation refers to the change of a substance from a gaseous phase to a liquid phase, an example of which is the condensation of water vapor in nature. Condensation is used in many industries, such as energy generation and seawater desal...

DOAJ Open Access (DOAJ) DOI: 10.1088/2053-1591/ace23a

Recent progress in tailoring Ni-rich layered oxides via coating and doping strategies for enhanced lithium-ion battery performance

Ha Eun Kang, Seong-Do Kim, Young Soo Yoon, Sang-Jin Lee • Applied Surface Science Advances (2025)

Nickel-rich layered oxide cathodes, typified by compositions such as LiNi₁₋ₓ₋ᵧCoₓMnᵧO₂ (NCM) have garnered significant attention as high-energy-density candidates for next-generation lithium-ion batteries. However, their widespread deployme...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.apsadv.2025.100826

siRNA Functionalized Lipid Nanoparticles (LNPs) in Management of Diseases

Tutu Kalita, Saba Abbasi Dezfouli, Lalit M. Pandey, Hasan Uludag • Pharmaceutics (2022)

RNAi (RNA interference)-based technology is emerging as a versatile tool which has been widely utilized in the treatment of various diseases. siRNA can alter gene expression by binding to the target mRNA and thereby inhibiting its translati...

DOAJ Open Access (DOAJ) DOI: 10.3390/pharmaceutics14112520

Hybrid coatings for orthopaedic implants formed by physical vapour deposition and microarc oxidation

Roman Gabor, Ladislav Cvrček, Martina Doubková, Václav Nehasil et al. • Materials & Design (2022)

This study is focused on the preparation of new hybrid layers intended for surface modification of Ti-6Al-4V alloys for potential orthopaedic and dental applications. Combination of the technology of physical vapour deposition (PVD) and sub...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2022.110811

Effects of adding bamboo fiber on various aspects of concrete performance: A state-of-the-art review

Longping Yan, Muwang Wei, Lei Huang, Huawei Li et al. • KSCE Journal of Civil Engineering (2026)

This review systematically examines the role of bamboo fiber (BF) in enhancing the performance of cement-based composites, with a particular focus on workability, mechanical properties, durability, and sustainability. BF, as a renewable and...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.kscej.2026.100676

Surface-Modified Nanocellulose for Application in Biomedical Engineering and Nanomedicine: A Review

Tortorella S, Vetri Buratti V, Maturi M, Sambri L et al. • International Journal of Nanomedicine (2020)

Silvia Tortorella, Veronica Vetri Buratti, Mirko Maturi, Letizia Sambri, Mauro Comes Franchini, Erica Locatelli Department of Industrial Chemistry “Toso Montanari”, Alma Mater Studiorum – University of Bologna, Bologna 401...

DOAJ Open Access (DOAJ)

Anti-Bacterial Microgel Synthesis: Sonochemical Modification of Carbopol for Hygienic Applications

Aghil Asadi, Mohsen Najafi, Hossien Bouhnedi, Mehdi Haji Bagherian • علوم و تکنولوژی پلیمر (2021)

Hypothesis: The volume of studies conducted on biopolymeric materials emphasizes the high-consumption of polymers in biomaterial fields, especially in cosmetics industry which must be resistant to different kinds of microorganisms and bacte...

DOAJ Open Access (DOAJ) DOI: 10.22063/jipst.2021.1779

Surface Modified Activated Carbons: Sustainable Bio-Based Materials for Environmental Remediation

Manoj Kumar Jha, Sahira Joshi, Ram Kumar Sharma, Allison A Kim et al. • Nanomaterials (2021)

Global warming and water/air contamination caused by human activities are major challenges in environmental pollution and climate change. The improper discharge of a large amount of agro-forest byproduct is accelerating these issues mainly ...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano11113140

Effect of chemical treatment on the mechanical and thermal performance of flax fiber reinforced aluminium 6082 laminate: a machine learning-enhanced investigation

M. Vinod, B. S. Nithyananda, Shrishail B. Sollapur, Satish Gajbhiv et al. • Scientific Reports (2026)

Abstract This work examined the role of alkaline and epoxy-based surface chemical treatments on the mechanical and thermal properties of flax fiber reinforced Aluminum Alloy 6082 hybrid Fiber Metal Laminates (FMLs), integrated with machine ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-026-58852-w

Click Chemistry in Materials Science

Weixian Xi, Timothy F. Scott, Christopher J. Kloxin, Christopher N. Bowman • Advanced Functional Materials (2014)

Despite originating only a little more than a decade ago, click chemistry has become one of the most powerful paradigms in materials science, synthesis, and modification. By developing and implementing simple, robust chemistries that do not...

OPENALEX Open Access DOI: https://doi.org/10.1002/adfm.201302847