Reset
Showing 20 of 223 academic articles

Spatial and Temporal Variability of Bed Exchange Characteristics of Fine Sediments From the Weser Estuary

J. Patzke, E. Nehlsen, P. Fröhle, R. F. Hesse • Frontiers in Earth Science (2022)

Sedimentation of fine-grained sediments in estuaries is a natural physical phenomenon influenced by biogeochemical processes. In the estuarine turbidity maximum (ETM), enhanced net deposition of sediments is observed even in areas with high...

DOAJ Open Access (DOAJ) DOI: 10.3389/feart.2022.916056

Hybrid Coatings Based on Polyvinylpyrrolidone/Polyethylene Glycol Enriched with Collagen and Hydroxyapatite: Incubation Studies and Evaluation of Mechanical and Physiochemical Properties

Dagmara Słota, Josef Jampilek, Agnieszka Sobczak-Kupiec • Journal of Functional Biomaterials (2024)

Coating materials offers an intriguing solution for imparting inert implants with additional bioactive characteristics without changing underlying parameters such as mechanical strength. Metallic implants like endoprostheses or polymeric im...

DOAJ Open Access (DOAJ) DOI: 10.3390/jfb15030062

Experimental studies of the influence of the characteristics of the metal bond coat on the durability of the heat-protective coating of the turbine blades of a gas turbine engine

E. V. Samoilenko, V. G. Ugreninov, V. V. Shestakov • Научный вестник МГТУ ГА (2025)

The service life of gas turbine engine (GTE) turbine blades with thermal barrier coatings (TBC) depends on many factors, including the composition, structure and properties of the metal bond coating (MB). The positive effect of using TBC is...

DOAJ Open Access (DOAJ) DOI: 10.26467/2079-0619-2025-28-5-41-49

Application of Electric Field to Developing Falling Films using Wire-Plate Electrode Configuration- An Experimental Study

R. Rouhollahi, S. Baheri Islami, R. Gharraei, M. R. Heirani Nobari • Journal of Applied Fluid Mechanics (2018)

Experimental investigation of Electrohydrodynamic developing falling film flow of transformer oil has been conducted within an inclined rectangular channel and hydrodynamic characteristics of the flow have been revealed. The electric field ...

DOAJ Open Access (DOAJ)

The influence of storage conditions on the dynamics of physicochemical markers of champignon (<i>Agaricus bisporus</i>) quality

N. E. Posokina, O. V. Bessarab, O. V. Karastoyanova, N. V. Korovkina • Пищевые системы (2024)

Agaricus bisporus are the most common cultivated mushrooms. Champignons are a source of chitin, glycogen and minerals, and also have attractive organoleptic properties. Physicochemical and organoleptic characteristics of fresh Agaricus bisp...

DOAJ Open Access (DOAJ) DOI: 10.21323/2618-9771-2024-7-3-427-437

Nanoparticle Deposition of Fluoropolymer CYTOP via Holographic Femtosecond Laser Processing and Its Biochip Application

Ryo Ozaki, Kotaro Ishida, Eiji Morita, Yasutaka Hanada • Applied Sciences (2020)

The fundamental characteristics of nanoparticle (NP) deposition of the fluoropolymer CYTOP using a femtosecond (fs) laser were investigated. In previous studies, we have demonstrated the microfluidic fabrication of CYTOP, which enables clea...

DOAJ Open Access (DOAJ) DOI: 10.3390/app10207243

Agarose Gel Characterization for the Fabrication of Brain Tissue Phantoms for Infrared Multispectral Vision Systems

Efraín Albor-Ramírez, Miguel Reyes-Alberto, Luis M. Vidal-Flores, Enoch Gutierrez-Herrera et al. • Gels (2023)

Synthetic phantoms that recreate the characteristics of biological tissues are valuable tools for systematically studying and comprehending physiologies, pathologies, and biological processes related to tissues. The reproduction of mechanic...

DOAJ Open Access (DOAJ) DOI: 10.3390/gels9120944

Utilizing Waste Cotton/Pigeon Pea Stalk Fibers Composites for Enhanced Sound Absorption and Insulation in Automotive Interiors

Ariharasudhan Subramanian, Senthil Kumar Selvaraj, Rajaram Mani, Preethibha Chandrasekaran et al. • Journal of Natural Fibers (2024)

This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced ...

DOAJ Open Access (DOAJ) DOI: 10.1080/15440478.2024.2333940

An innovative and sustainable design of intangible Miao wax printing patterns in combination of diffusion model and fuzzy TOPSIS

Xinhui Kang, Wenjie You, Huaqian Xie • Humanities & Social Sciences Communications (2025)

Abstract Miao wax printing is a dyeing and weaving process in which natural dyes replace chemical dyes. It is renowned for its unique patterns and exquisite craftsmanship. However, with the development of industrialization and the decreasin...

DOAJ Open Access (DOAJ) DOI: 10.1057/s41599-025-05724-9

Editorial

Bulent Cavas • Science Education International (2026)

Dear Readers, The September 2026 issue of Science Education International presents 11 original research articles authored by scholars from 11 countries, including Germany, Slovenia and Italy, Finland and South Africa, Brazil, Chile and Arge...

DOAJ Open Access (DOAJ) DOI: 10.33828/sei.v37.i4.e

Investigating Undergraduate Students’ Learning Styles and Preferences in English as a Second Language: The Case of a Public University in Ghana

Gifty Budu, Edward Owusu, Levina N. Abunya, Emma Sarah Eshun • E-Journal of Humanities, Arts and Social Sciences (2025)

This study examines selected undergraduate students’ learning styles and preferences at a public university in Ghana. These participants were Level 100 students pursuing the Bachelor of Information Technology programme. The study sought to ...

DOAJ Open Access (DOAJ) DOI: https://doi.org/10.38159/ehass.2025653

Artificial neural network modeling of mixed convection viscoelastic hybrid nanofluid across a circular cylinder with radiation effect: Case study

Syed M. Hussain, Rahimah Mahat, Nek Muhammad Katbar, Imran Ullah et al. • Case Studies in Thermal Engineering (2023)

As a result of its use in the manufacturing and construction industries, research on the flow of nanofluid is rather well-known among academics and professionals in related fields. It is helpful for electrical equipment to utilize it for co...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2023.103487

Big Data Driven Supply Chain Management and Business Administration

Lidong Wang, Cheryl Ann Alexander • American Journal of Economics and Business Administration (2015)

Big Data helps improve visibility throughout the supply chain, provides an integrated view of operational performance and customer interaction and gives businesses real-time insights that help make critical decisions. Big Data also has a po...

OPENALEX cc-by DOI: https://doi.org/10.3844/ajebasp.2015.60.67

Collaboration opportunities for driving sustainable farming systems and local communities: The case of banana cooperatives in Thailand

Haruhiko Iba, Apichaya Lilavanichakul • Societal Impacts (2024)

Developing sustainable farming systems is necessary to realize profitable and eco-friendly farms that benefit society. As Thailand is increasingly facing climate crisis, production damage, and economic loss for farmers, alternative solution...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.socimp.2024.100087

Synergetic method between materials flow and energy flow in iron and steel intelligent manufacturing

ZHENG Zhong, HUANG Shi-peng, LONG Jian-yu, GAO Xiao-qiang • 工程科学学报 (2017)

Iron and steel enterprises are facing difficult problems such as increasing inventory, excess capacity, and poor profitability. It is urgent to solve them through the development of green and intelligent manufacturing technology for iron an...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2017.01.015

Human Resource Management Strategies in Achieving Competitive Advantage in Business Administration

Kresnawidiansyah Agustian, Aryanda Pohan, Agustian Zen, Wiwin Wiwin et al. • Journal of Contemporary Administration and Management (ADMAN) (2023)

Human Resource Management (HRM) is a very important aspect in the modern business world. Companies that manage their people effectively tend to have a greater competitive advantage over their competitors. This is due to the fact that HR is ...

OPENALEX cc-by-nc-sa DOI: https://doi.org/10.61100/adman.v1i2.53

Statistical Optimization of Medium for Pullulan Production by Aureobasidium pullulans NCPS2016 Using Fructose and Soybean Meal Hydrolysates

Jinyu Yang, Yanhao Zhang, Shuangzhi Zhao, Qingxin Zhou et al. • Molecules (2018)

Pullulan, with its excellent characteristics of film-forming, water solubility, and biodegradability, is attracting more and more attention in agricultural products preservation. However, high pullulan production cost largely restricts its ...

DOAJ Open Access (DOAJ) DOI: 10.3390/molecules23061334

Influence of chemical composition and discontinuities on energy transformation and rock mass behaviour: Insights into geological dynamic

Naeem Abbas, Kegang Li, Yewuhalashet Fissha, Zemicael Gebrehiwot et al. • The Journal of Engineering (2024)

Abstract In this study, efforts were made to incorporate the influence of discontinuities and failure modes of rock into the classification of rock masses. The past tectonic activities may create microfractures in the rock body therefore th...

DOAJ Open Access (DOAJ) DOI: 10.1049/tje2.12388

Materials for Total Hip Joint Prostheses: Biaxial Flexural Strength of Two Ceramic Systems

Bojana TABAKOVA, Ivanka KALIMANOVA, Ina YANKOVA, Hristiana NIKOLOVA • The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science (2010)

Total hip joint replacement is one of the most successful orthopaedic surgeries in the last decade. Essential part of total hip joint prostheses is the mobile joint “hemispherical head - hemispherical cup”. Functional properties and durabil...

DOAJ Open Access (DOAJ)