Home »
Academic Articles »
Art »
Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy
Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy
Han Yuyin
(School of Materials Science and Engineering, Shanghai Jiao Tong University)
Ding Dongyan
(School of Materials Science and Engineering, Shanghai Jiao Tong University)
Du Jiandi
(School of Materials Science and Engineering, Shanghai Jiao Tong University)
Gao Yongjin
(HuafonNikkei Aluminium Corporation, Ltd.)
Journal: 上海师范大学学报. 自然科学版
•
• Academic Journals Center of Shanghai Normal University
• ISSN: 1000-5137
Abstract
Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning electron microscopy,and electrochemical measurement.Experimental results indicated that main phases distributed in the alloy wereα-Al(Mn,Fe)Si,Al<sub>2</sub>Sm and Al<sub>10</sub>Cu<sub>7</sub>Sm<sub>2</sub>.Alloying with Sm element could refine the precipitated α-Al(Mn,Fe)Si phase.Polarization testing results indicated that the corrosion surfacewas mainly composed of pitting pits and corrosion products.Sea water acetic acid test(SWAAT) showed that corrosion loss increased first and then slowed downwith increase of the corrosion time.
Han Yuyin, Ding Dongyan, Du Jiandi, et al. (2017). "Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy". 上海师范大学学报. 自然科学版. https://doi.org/10.3969/j.issn.1000-5137.2017.06.006