Reset
Showing 11 of 11 academic articles

Comparative investigation of similar and dissimilar AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced by continuous-drive friction welding

Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology (2026)

This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.09.145

Effect of Prior Rolling on Microstructures and Property of Diffusion-Bonded Mg/Al Alloy

Yunlong Ding, Jialian Shi, Dongying Ju • Advances in Materials Science and Engineering (2019)

In this study, magnesium alloy AZ91, which was cast by double roll casting system, was rolled by a rolling mill. Then, rolled magnesium alloy and magnesium alloy without being rolled were, respectively, welded with aluminum alloy 6061 by di...

DOAJ Open Access (DOAJ) DOI: 10.1155/2019/4535984

Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy

Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版 (2017)

Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...

DOAJ Open Access (DOAJ) DOI: 10.3969/J.ISSN.1000-5137.2017.06.006

Development, modelling and optimization of process parameters on the tensile strength of aluminum, reinforced with pumice and carbonated coal hybrid composites for brake disc application

Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports (2024)

Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-024-67476-x

Effect of chemical treatment on the mechanical and thermal performance of flax fiber reinforced aluminium 6082 laminate: a machine learning-enhanced investigation

M. Vinod, B. S. Nithyananda, Shrishail B. Sollapur, Satish Gajbhiv et al. • Scientific Reports (2026)

Abstract This work examined the role of alkaline and epoxy-based surface chemical treatments on the mechanical and thermal properties of flax fiber reinforced Aluminum Alloy 6082 hybrid Fiber Metal Laminates (FMLs), integrated with machine ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-026-58852-w

Effects of Annealing and Deformation on Sagging Resistance of a Hot-Rolled, Four-Layered Al Alloy Clad Sheet

Minglong Kang, Li Zhou, Yunlai Deng, Jinqin Lei • Advances in Materials Science and Engineering (2021)

Multilayer brazeable aluminum alloy sheet is prone to collapse during high-temperature brazing process. The sagging resistance of the aluminum composite sheet needs to be further improved for quality control. Effects of annealing and rate o...

DOAJ Open Access (DOAJ) DOI: 10.1155/2021/6625548

Laser Welding of Dissimilar Metal Joint of 6061 Al Alloy and Al Matrix Composite

Jun Dai, Banglong Yu, Wei Jiang, Hla Min Htun et al. • Advances in Materials Science and Engineering (2019)

In this paper, dissimilar metal joints of 6061 aluminum alloy and aluminum matrix composite material are investigated by laser welding. TiB2 particles were added into the lap joint. The welding process, microstructure, and the corrosion pro...

DOAJ Open Access (DOAJ) DOI: 10.1155/2019/2359841

Automated Burr Quality Classification in Drilling of AA6013 Aluminum Alloy Using YOLOv10n

Mikail Kırğıl, Suleyman Gokhan Taskin, Ali Ercetin • Applied Sciences (2026)

Burr formation during drilling of aluminum alloys can compromise hole quality and assembly accuracy, increasing the need for secondary deburring operations. The time-consuming and operator-dependent nature of manual visual inspection create...

DOAJ Open Access (DOAJ) DOI: 10.3390/app162010012

A novel machine learning-based model for predicting the transition fatigue lifetime in piston aluminum alloys

Mahmood Matin, Mohammad Azadi • International Journal of Lightweight Materials and Manufacture (2024)

The estimation of transition fatigue lifetimes for piston aluminum alloys was carried out using unsupervised machine learning (ML) with the K-means algorithm. For this purpose, an experimental dataset representing standard ISO specimens wit...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ijlmm.2024.04.004