Home »
Academic Articles & Research Papers
Showing 20 of 86 academic articles
E. V. Samoilenko, V. G. Ugreninov, V. V. Shestakov • Научный вестник МГТУ ГА
(2025)
The service life of gas turbine engine (GTE) turbine blades with thermal barrier coatings (TBC) depends on many factors, including the composition, structure and properties of the metal bond coating (MB). The positive effect of using TBC is...
DOAJ
Open Access (DOAJ)
DOI: 10.26467/2079-0619-2025-28-5-41-49
Ningning Cao, Changqing Ye, Yifan Zhang, Xudong Xiang et al. • DeCarbon
(2026)
While seasonally fixed passive coolers provide thermal relief during heat-stress periods, their intrinsic mechanism of continuous heat dissipation renders them inherently thermally penalizing during the heating season. Here, we report and h...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.decarb.2026.100191
Youngmi Baek, Euiguk Jung • Case Studies in Thermal Engineering
(2022)
This study investigates the start-up and steady-state heat transfer performance of a heat pipe with a bypass line for accelerating a working fluid. The interface resistance by the counterflow of vapor and liquid under the operation of a hea...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.csite.2021.101708
Kalani M, Yunus R, Abdullah N • International Journal of Nanomedicine
(2011)
Mahshid Kalani, Robiah Yunus, Norhafizah AbdullahChemical and Environmental Engineering, Faculty of Engineering, University Putra Malaysia, Selangor Darul Ehsan, MalaysiaBackground: The aim of this study was to optimize the different proces...
DOAJ
Open Access (DOAJ)
Paolo Pegolo, Stefano Baroni, Federico Grasselli • npj Computational Materials
(2022)
Abstract Despite governing heat management in any realistic device, the microscopic mechanisms of heat transport in all-solid-state electrolytes are poorly known: existing calculations, all based on simplistic semi-empirical models, are unr...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41524-021-00693-4
Prlić Ivica, Šiško Jerko, Varnai Veda Marija, Pavelić Luka et al. • Arhiv za Higijenu Rada i Toksikologiju
(2022)
An enormous increase in the application of wireless communication in recent decades has intensified research into consequent increase in human exposure to electromagnetic (EM) radiofrequency (RF) radiation fields and potential health effect...
DOAJ
Open Access (DOAJ)
DOI: 10.2478/aiht-2022-73-3402
Y. Xue, T. Fung, J. Tsou • The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
(2012)
Urban warming is sensitive to the nature (thermal properties, including albedo, water content, heat capacity and thermal conductivity) and the placement (surface geometry or urban topography) of urban surface. In the literature the spatial ...
DOAJ
Open Access (DOAJ)
DOI: 10.5194/isprsarchives-XXXIX-B8-131-2012
Syed M. Hussain, Rahimah Mahat, Nek Muhammad Katbar, Imran Ullah et al. • Case Studies in Thermal Engineering
(2023)
As a result of its use in the manufacturing and construction industries, research on the flow of nanofluid is rather well-known among academics and professionals in related fields. It is helpful for electrical equipment to utilize it for co...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.csite.2023.103487
Hüseyin Peker, Ümit Ayata, Göksel Ulay • Drewno
(2025)
Scots pine wood represents one of the important tree species used by the wood processing industry in many countries for both interior and exterior applications. It is well known that thermal treatment alters the color of wood. To protect wo...
DOAJ
Open Access (DOAJ)
DOI: 10.53502/wood-201974
Xiaohui Li, Yulong Kang, Chen Chen, Jianghua Li et al. • AIP Advances
(2017)
Lithium and calcium are inefficient filling elements of CoSb3 at ambient pressure, but show nice filling behavior under high pressure. In this work, we synthesized Li/Ca double-filled CoSb3 with high pressure synthesis method. The products ...
DOAJ
Open Access (DOAJ)
DOI: 10.1063/1.4974501
Wasim Jamshed, M. Prakash, S. Suriya Uma Devi, Rabha W. Ibrahim et al. • Scientific Reports
(2021)
Abstract A novel hybrid nanofluid was explored in order to find an efficient heat-transmitting fluid to replace standard fluids and revolutionary nanofluids. By using tangent hyperbolic hybrid combination nanoliquid with non-Newtonian ethyl...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-021-03392-8
Eva Barreira, Vasco P. de Freitas • Advances in Materials Science and Engineering
(2014)
External Thermal Insulation Composite Systems (ETICS) are often used in Europe. Despite its thermal advantages, low cost, and ease of application, this system has serious problems of biological growth causing the cladding defacement. Recent...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2014/650752
Inés Pérez-Gonzalo, Florentino Alvarez-Antolin, Alejandro González-Pociño, Luis Borja Peral-Martinez • Journal of Manufacturing and Materials Processing
(2025)
This study investigates the mechanical, tribological, and electrochemical behaviour of a novel precipitation-hardenable martensitic alloy produced by selective laser melting (SLM). The alloy was specifically engineered with an optimised com...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/jmmp9080261
Yash Vishnoi, Alok Kumar Trivedi, M.K. Gupta, Harinder Singh et al. • Heliyon
(2024)
In the present decades, nanocellulose has been very popular in the field of nanotechnology and is receiving much attention from researchers because of its advantageous physicochemical properties, high aspect ratio, and high specific strengt...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2023.e23846
Zhigang Huang, Jiahui Wu, Tenglun Yang, Zihan Wang et al. • Foods
(2024)
The impact of COVID-19 has boosted growth in the takeaway and medical industries but has also generated a large amount of plastic waste. Peanut shells (PS) are produced in large quantities and are challenging to recycle in China. Co-pyrolys...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/foods13081191
V. V. Novodvorskyi, G. K. Ivanitsky • Nauka ta progres transportu
(2023)
Purpose. Polymer products are used in industry due to their performance properties. The homogeneity of the melt is essential for the quality of the final product. Uniform distribution of components and properties ensures homogeneity of the ...
DOAJ
Open Access (DOAJ)
DOI: 10.15802/stp2023/282982
Yue Guo, Chenglong Wang, Abdelmalek Bouazza, Xuanming Ding et al. • Case Studies in Thermal Engineering
(2026)
Seasonal temperature fluctuations in cold regions induce freeze–thaw cycles that can significantly impact the structural safety and maintenance of tunnels. This study uses the Daban Mountain Tunnel as a case study to develop a full-scale nu...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.csite.2026.108518
Agnieszka Ziółkiewicz, Kamila Kasprzak-Drozd, Agnieszka Wójtowicz, Tomasz Oniszczuk et al. • Molecules
(2023)
The phenol content of sorghum is a unique feature among all cereal grains; hence this fact merits the special attention of scientists. It should be remembered that before polyphenols can be used in the body, they are modified within the dig...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/molecules28041706
Yongbo Bu, Guoqing Luo, Minglun Wang, Fuwu Yan • Energies
(2025)
Developing smart fast charging strategies can effectively balance the charging efficiency and battery performance. The current mainstream method is to optimize fast charging protocols based on electrochemical models that quantitatively dete...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/en18236251
Yaya Wu, Yan Wen, Anan Guo, Jian Zhou et al. • Journal of Materials Research and Technology
(2023)
This work used electroshocking treatment (EST) plus external loading to regulate the microstructure of titanium matrix composites (TMCs). The external loading was 0.3 MPa. After EST plus external loading with 0.3 MPa, the α was reduced to 2...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2023.10.177