Reset
Showing 20 of 25 academic articles

Subsecond optically controlled domain switching in freestanding ferroelectric BaTiO3 membrane

Subhajit Pal, Lan-Tien Hsu, Haoying Sun, Sheng-Han Teng et al. • Nature Communications (2025)

Abstract The quest to develop energy-efficient and fast optoelectronic control of memory devices is essential. In this respect, ferroelectric materials are gaining tremendous importance in information and communication technology. Here, we ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41467-025-58592-x

Breaking of Thermopower–Conductivity Trade‐Off in LaTiO3 Film around Mott Insulator to Metal Transition

Takayoshi Katase, Xinyi He, Terumasa Tadano, Jan M. Tomczak et al. • Advanced Science (2021)

Abstract Introducing artificial strain in epitaxial thin films is an effective strategy to alter electronic structures of transition metal oxides (TMOs) and to induce novel phenomena and functionalities not realized in bulk crystals. This s...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202102097

Study of the growth mechanism of a self-assembled and ordered multi-dimensional heterojunction at atomic resolution

Zunyu Liu, Chaoyu Zhao, Shuangfeng Jia, Weiwei Meng et al. • Frontiers of Optoelectronics (2023)

Abstract Multi-dimensional heterojunction materials have attracted much attention due to their intriguing properties, such as high efficiency, wide band gap regulation, low dimensional limitation, versatility and scalability. To further imp...

DOAJ Open Access (DOAJ) DOI: 10.1007/s12200-023-00091-2

Dynamic Assembly of Microgels and Polymers at Non‐Aqueous Liquid/Liquid Interfaces

Xin Guan, Yang Liu, Lianwei Li, Man‐Hin Kwok et al. • Advanced Science (2025)

Abstract Particle assembly at liquid–liquid interfaces presents a promising bottom‐up strategy for creating supramolecular materials with advanced functionalities. However, the significantly lower interfacial tension observed in immiscible ...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202415642

Functionalization of polyoxometalates: towards advanced applications in catalysis and materials science

Anna Proust, René Thouvenot, Pierre Gouzerh • Chemical Communications (2008)

Functionalization via covalent grafting of organic functions allows to tune the redox and acid-base properties, and the solubility of polyoxometalates, to enhance their stability and biological activity and to reduce their toxicity, to faci...

OPENALEX DOI: https://doi.org/10.1039/b715502f

Investigation of Microstructure and Mechanical Behavior of Nanomodified Cement-Based Materials

Spyridoula G. Farmaki, Dimitrios A. Exarchos, Vasileios Dracopoulos, Anastasios Gkotzamanis et al. • Applied Mechanics (2026)

Recent advances in nanotechnology have highlighted the transformative potential of carbon-based nanomaterials, such as carbon nanofibers, carbon nanotubes, and graphene, in cementitious systems. These materials have shown a remarkable abili...

DOAJ Open Access (DOAJ) DOI: 10.3390/applmech7010013

Light Absorption and Emission by Defects in Doped Nickel Oxide

Robert Karsthof, Ymir Kalmann Frodason, Augustinas Galeckas, Philip Michael Weiser et al. • Advanced Photonics Research (2022)

Nickel oxide is a versatile p‐type semiconducting oxide with many applications in optoelectronic devices, but high doping concentrations are often required to achieve necessary electrical conductivity. In contrast to many other transparent ...

DOAJ Open Access (DOAJ) DOI: 10.1002/adpr.202200138

3D Printing parameter optimisation combined with heat treatment for achieving high density and enhanced performance in refractory high-entropy alloys

Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang et al. • Virtual and Physical Prototyping (2025)

In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified,...

DOAJ Open Access (DOAJ) DOI: 10.1080/17452759.2025.2524524

Research progress in high thermal conductivity of silicon carbide matrix composites reinforced with fibers

CHEN Qiang, LI Shun, ZHU Li'an, BAI Shuxin et al. • Cailiao gongcheng (2023)

As one kind of advanced high temperature structural and functional materials, it is necessary for fiber reinforced silicon carbide matrix composites (SiC CMCs) in the field of thermal management (TM) to combine the efficient heat transfer a...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2023.000079

Simulation of the synergistic effect of multiple operation parameters on cavity soliton in nonlinear fiber resonator

Haiyang Liu, Zhe Li, Zeqiu Hu, Lu Liu et al. • Results in Physics (2024)

All optical soliton communication is a new generation of ultra-long distance and ultra-high speed optical fiber communication technology. Optical cavity solitons (CSs), whose pulse property is unique, have shown great potentials in optical ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2024.107821

Nanofibers with a tunable wettability by electrospinning and physical crosslinking of poly(2-n-propyl-2-oxazoline)

Ella Schoolaert, Luisa Cossu, Jana Becelaere, Joachim F.R. Van Guyse et al. • Materials & Design (2020)

This work shows the design of highly porous membranes with tunable wettability based on poly(2-n-propyl-2-oxazoline) (PnPrOx) nanofibers. Wicking and advanced contact angle experiments demonstrate the high potential for applications requiri...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2020.108747

Bi‐Functional Materials for Sulfur Cathode and Lithium Metal Anode of Lithium–Sulfur Batteries: Status and Challenges

Ying Dou, Junling Guo, Junke Shao, Jiaozi Duan et al. • Advanced Science (2024)

Abstract Over the past decade, the most fundamental challenges faced by the development of lithium–sulfur batteries (LSBs) and their effective solutions have been extensively studied. To further transfer LSBs from the research phase into th...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202407304

Expression of Recombinant Human Amelogenin in Iranian Lizard Leishmania and Its Biological Function Assay

Zahra YADEGARI, Mojgan BANDEHPOUR, Bahram KAZEMI, Khojasteh SHARIFI-SARASIABI • Iranian Journal of Public Health (2015)

Background: Amelogenins are the major components of enamel matrix proteins. Enamel matrix derivatives (EMD) can be used in periodontal diseases to regenerate periodontal tissues. The main aim of this study was to evaluate ex-pression of ful...

DOAJ Open Access (DOAJ)

Formation of supporting points for production growth based on diversification of the regional industry

Ruzmetov Baxtiyar, Ruzmetov Sherzod, Bakhtiyarov Shakhzod, Dzhumaeva Zulfiya et al. • E3S Web of Conferences (2023)

The article describes production opportunities based on diversification of industry in Khorezm region and ways to form “growth points” in economic sectors of the region. Taking these circumstances into account, “growth points” aimed at the ...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202344901001

Functionalising Collagen-Based Scaffolds With Platelet-Rich Plasma for Enhanced Skin Wound Healing Potential

Ronaldo J. F. C. do Amaral, Ronaldo J. F. C. do Amaral, Ronaldo J. F. C. do Amaral, Noora M. A. Zayed et al. • Frontiers in Bioengineering and Biotechnology (2019)

Porous collagen-glycosaminoglycan (collagen-GAG) scaffolds have shown promising clinical results for wound healing; however, these scaffolds do not replace the dermal and epidermal layer simultaneously and rely on local endogenous signaling...

DOAJ Open Access (DOAJ) DOI: 10.3389/fbioe.2019.00371

Soft Robotic Grippers

Jun Shintake, Vito Cacucciolo, Dario Floreano, Herbert R. Shea • Advanced Materials (2018)

Advances in soft robotics, materials science, and stretchable electronics have enabled rapid progress in soft grippers. Here, a critical overview of soft robotic grippers is presented, covering different material sets, physical principles, ...

OPENALEX cc-by DOI: https://doi.org/10.1002/adma.201707035

Functional Fibers and Fabrics for Soft Robotics, Wearables, and Human–Robot Interface

Jiaqing Xiong, Jian Chen, Pooi See Lee • Advanced Materials (2020)

Soft robotics inspired by the movement of living organisms, with excellent adaptability and accuracy for accomplishing tasks, are highly desirable for efficient operations and safe interactions with human. With the emerging wearable electro...

OPENALEX cc-by-nc DOI: https://doi.org/10.1002/adma.202002640 PMC: 11468729

Continuous monitoring biosensors for advanced healthcare and environmental applications: challenges, material innovations and future directions

Kiran Kumar Amireddy, P. V. R. Ravindra Reddy, C. Nagendranatha Reddy, P. Prabhakar Reddy • Frontiers in Sensors (2026)

This review critically discusses the development of continuous monitoring biosensors and the technological developments that have facilitated the transition from one-off or periodic measurement sensors to longer-term, connected and autonomo...

DOAJ Open Access (DOAJ) DOI: 10.3389/fsens.2026.1968999

Photoresponsive Biomimetic Soft Robots Enabled by Near‐Infrared‐Driven and Ultrarobust Sandwich‐Structured Nanocomposite Films

Yi Yu, Ran Peng, Zihe Chen, Li Yu et al. • Advanced Intelligent Systems (2021)

Soft robots, intelligent structures built up of smart soft materials, are capable of being programmed to perform delicate work. Recently, plenty of biomimetic soft robots with functionalities of grasping, sensing, searching, and transportin...

DOAJ Open Access (DOAJ) DOI: 10.1002/aisy.202100012