Reset
Showing 20 of 196 academic articles

From ideation to execution: Unleashing the power of generative AI in modern digital marketing and customer engagement- A systematic literature review and case study

Sayeed Salih, Omayma Husain, Refan Mohamed Almohamedh, Hayfaa tajelsier et al. • Array (2026)

Generative Artificial Intelligence (GAI) is revolutionizing digital marketing by auto-content creation, personalized customer experience, and data-driven decisions. This study conducts a systematic literature review and case study analysis ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.array.2025.100630

Why Socio-metabolic Studies are Central to Ecological Economics

Simron J Singh, Simran Talwar, Megha Shenoy • Ecology, Economy and Society – The INSEE Journal (2021)

Global material extraction has tripled since the 1970s, with more than 100 billion tonnes of materials entering the world economy each year. Only 8.6% of this is recycled, while 61% ends up as waste and emissions that is the leading cause o...

DOAJ Open Access (DOAJ) DOI: 10.37773/ees.v4i2.461

Horizons in Human Geography

Keith Hoggart, Derek Gregory, Rex Walford • Geographical Journal (1990)

Preface - Introduction: Making Geography - D.Gregory and R.Walford - ART 1 BEYOND THE QUANTITATIVE REVOLUTION - Introduction - Geography and Information Technology - M.J.Clark - Mathematical Models and Geographical Theory - A.Wilson - Philo...

OPENALEX DOI: https://doi.org/10.2307/635460

Sistemi ortofrutticoli sostenibili

Albino Maggio, Raffaele Testolin, Giorgio Gianquinto • Italian Journal of Agronomy (2011)

The sustainability of agricultural production systems is a recurrent topic in the public debate, tightly linked to resource use efficiency and energy saving principles. "Higher yield with lower input" is the paradigm that will guide us in t...

DOAJ Open Access (DOAJ) DOI: 10.4081/ija.2011.6.s2.e3

Editorial

Bulent Cavas • Science Education International (2026)

Dear Readers, The September 2026 issue of Science Education International presents 11 original research articles authored by scholars from 11 countries, including Germany, Slovenia and Italy, Finland and South Africa, Brazil, Chile and Arge...

DOAJ Open Access (DOAJ) DOI: 10.33828/sei.v37.i4.e

Digital Maturity Assessment and Conceptualization: Manufacturing Companies Perspective

Mohammadreza Sheikhattar, Hassan Yeganeh, Atefeh Farazmand • International Journal of Information and Communication Technology Research (2025)

Production is a key component of every nation’s economy, yet the manufacturing sector faces major challenges and opportunities due to rapid digital transformation. Many companies have not fully adapted to these technological shifts, limitin...

DOAJ Open Access (DOAJ)

Geography and Trade

Paúl Krugman • RePEc: Research Papers in Economics (1991)

I have spent my whole professional life as an international economist thinking and writing about economic geography, without being aware of it, begins Paul Krugman in the readable and anecdotal style that has become a hallmark of his writin...

OPENALEX

Practices of artificial intelligence to improve the business in Bangladesh

Md. Touhidul Islam, Md. Mahadi Hasan, Md. Redwanuzzaman, Md. Kamal Hossain • Social Sciences and Humanities Open (2024)

This research paper explores the practices of artificial intelligence (AI) and its impact on improving businesses in Bangladesh through the review of existing literature and primary data analysis. Additionally, a conceptual analysis has bee...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ssaho.2023.100766

Collaboration opportunities for driving sustainable farming systems and local communities: The case of banana cooperatives in Thailand

Haruhiko Iba, Apichaya Lilavanichakul • Societal Impacts (2024)

Developing sustainable farming systems is necessary to realize profitable and eco-friendly farms that benefit society. As Thailand is increasingly facing climate crisis, production damage, and economic loss for farmers, alternative solution...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.socimp.2024.100087

Synergetic method between materials flow and energy flow in iron and steel intelligent manufacturing

ZHENG Zhong, HUANG Shi-peng, LONG Jian-yu, GAO Xiao-qiang • 工程科学学报 (2017)

Iron and steel enterprises are facing difficult problems such as increasing inventory, excess capacity, and poor profitability. It is urgent to solve them through the development of green and intelligent manufacturing technology for iron an...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2017.01.015

Statistical Optimization of Medium for Pullulan Production by Aureobasidium pullulans NCPS2016 Using Fructose and Soybean Meal Hydrolysates

Jinyu Yang, Yanhao Zhang, Shuangzhi Zhao, Qingxin Zhou et al. • Molecules (2018)

Pullulan, with its excellent characteristics of film-forming, water solubility, and biodegradability, is attracting more and more attention in agricultural products preservation. However, high pullulan production cost largely restricts its ...

DOAJ Open Access (DOAJ) DOI: 10.3390/molecules23061334

Comparative investigation of similar and dissimilar AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced by continuous-drive friction welding

Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology (2026)

This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.09.145

Circular Economy in Industrial Design Research: A Review

Kirsten van Dam, Luca Simeone, Duygu Keskin, Brian Baldassarre et al. • Sustainability (2020)

In the past decades, industrial design practice and research have focused extensively on how to optimize production and consumption, as a way to prevent negative environmental impacts, such as resource depletion, pollution, and excessive wa...

OPENALEX cc-by DOI: https://doi.org/10.3390/su122410279

Microstructure and corrosion behavior of SLM–Ti6Al4V with different fabrication angles in F−-containing solutions

Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报 (2021)

Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2020.09.29.001

Materials Science Foundations

• Materials science foundations (2016)

Foundations of Materials Science and Engineering (FoMSE) is the successor journal of the former Materials Science Foundations (monograph series) Materials Science Foundations (monograph series) is the periodical edition which consists of se...

OPENALEX DOI: https://doi.org/10.4028/www.scientific.net/msfo

Extraction of nano-crystalline cellulose for development of aerogel: Structural, morphological and antibacterial analysis

Yash Vishnoi, Alok Kumar Trivedi, M.K. Gupta, Harinder Singh et al. • Heliyon (2024)

In the present decades, nanocellulose has been very popular in the field of nanotechnology and is receiving much attention from researchers because of its advantageous physicochemical properties, high aspect ratio, and high specific strengt...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2023.e23846