Home »
Academic Articles & Research Papers
Showing 20 of 2,355 academic articles
Jeong Han Lee, Min Ju O, Yong-Mook Kang, Kwang Chul Roh • Electrochemistry Communications
(2024)
Petroleum pitch (PP) is a by-product generated during the petroleum refining process, characterized by its high carbon content, tunable structure, and cost-effectiveness. These attributes have spurred extensive research into its potential a...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.elecom.2023.107638
Yangzhong Jing, Shuliang Wang, Yuyao Chen, Mingyu Bao et al. • International Journal of Electrochemical Science
(2018)
Corrosion product films were formed on P110 casing steels by high-temperature and high-pressure autoclave in a CO2 environment induced by tensile stress. The effects of applied tensile stress on the protection characteristics and electroche...
DOAJ
Open Access (DOAJ)
DOI: 10.20964/2018.08.21
Yunlong Ding, Jialian Shi, Dongying Ju • Advances in Materials Science and Engineering
(2019)
In this study, magnesium alloy AZ91, which was cast by double roll casting system, was rolled by a rolling mill. Then, rolled magnesium alloy and magnesium alloy without being rolled were, respectively, welded with aluminum alloy 6061 by di...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2019/4535984
Hua Zhang, Taojian Fan, Wen Chen, Yingchun Li et al. • Bioactive Materials
(2020)
Smart drug delivery nano-systems show significant changes in their physical or chemical properties in response to slight change in environmental physical and/or chemical signals, and further releasing drugs adjusted to the progression of th...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.bioactmat.2020.06.012
Zunyu Liu, Chaoyu Zhao, Shuangfeng Jia, Weiwei Meng et al. • Frontiers of Optoelectronics
(2023)
Abstract Multi-dimensional heterojunction materials have attracted much attention due to their intriguing properties, such as high efficiency, wide band gap regulation, low dimensional limitation, versatility and scalability. To further imp...
DOAJ
Open Access (DOAJ)
DOI: 10.1007/s12200-023-00091-2
Xin Guan, Yang Liu, Lianwei Li, Man‐Hin Kwok et al. • Advanced Science
(2025)
Abstract Particle assembly at liquid–liquid interfaces presents a promising bottom‐up strategy for creating supramolecular materials with advanced functionalities. However, the significantly lower interfacial tension observed in immiscible ...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/advs.202415642
Shuping Wang, Pengcheng Chen, Xiaozhen Jing, Jinglin Zou et al. • Materials & Design
(2026)
STING agonist-based immunotherapy holds considerable promise for cancer treatment, yet its efficacy against immunologically “cold” tumors such as lung adenocarcinoma (LUAD) remains markedly limited. A major obstacle lies in the highly glyco...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2026.117182
Jing Ma, Ruijuan Ma, Xueke Zeng, Liming Zhang et al. • Journal of Experimental & Clinical Cancer Research
(2023)
Abstract Background Platinum-drugs based chemotherapy in clinic increases the potency of tumor cells to produce M2 macrophages, thus leading to poor anti-metastatic activity and immunosuppression. Lysosome metabolism is critical for cancer ...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s13046-023-02768-0
Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报
(2021)
Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...
DOAJ
Open Access (DOAJ)
DOI: 10.13374/j.issn2095-9389.2020.09.29.001
Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版
(2017)
Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...
DOAJ
Open Access (DOAJ)
DOI: 10.3969/J.ISSN.1000-5137.2017.06.006
Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics
(2023)
Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.rinp.2023.106360
Komissarchuk Olga, Xu Zhengbin, Hao Hai • China Foundry
(2014)
Porous aluminum alloys produced by the metal-gas eutectic method or GASAR process need to be performed under a certain pressure of hydrogen, and to carry over melt to a tailor-made apparatus that ensures directional solidification. Hydrogen...
DOAJ
Open Access (DOAJ)
Donald R. Askeland, Pradeep Fulay (2013)
This text provides students with a solid understanding of the relationship between the structure, processing, and properties of materials. Authors Donald Askeland and Pradeep Fulay teach the fundamental concepts of atomic structure and beha...
OPENALEX
Lei Zhao, Shirong Sun, Jinxin Lin, Lei Zhong et al. • Nano-Micro Letters
(2023)
Highlights The N/S co-doped lignin-derived porous carbon (NSLPCs) with ultra-high heteroatom doping was prepared through a novel supramolecule-mediated pyrolysis strategy. Covalently bonded graphitic carbon/amorphous carbon intermediates in...
DOAJ
Open Access (DOAJ)
DOI: 10.1007/s40820-022-01006-0
Lena Katharina Müller-Heupt, Anja Eckelt, John Eckelt, Jonathan Groß et al. • Antibiotics
(2023)
Periodontitis is a common global disease caused by bacterial dysbiosis leading to tissue destruction, and it is strongly associated with anaerobic bacterial colonization. Therapeutic strategies such as oxygen therapy have been developed to ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/antibiotics12060990
ZHU Hongye, WANG Xiaoxu, LYU Jixiang, HAO Shulei • Xi'an Gongcheng Daxue xuebao
(2025)
To study the influence of edge effects on the resin filling flow pattern in the RTM process of composite materials, the finite element software PAM-RTM was used to simulate and analyze the impregnation process of the blade preforms in RTM.B...
DOAJ
Open Access (DOAJ)
DOI: 10.13338/j.issn.1674-649x.2025.04.002
Jiasheng Zhou, Haipeng Li, Ziqiang Yang, Zitao Zhang et al. • Carbon Trends
(2021)
Graphene quantum dots (GQDs) are nanosized fragments of graphene containing a bandgap caused by edge effects and quantum confinement. These features enable GQDs to have attractive photonics applications. During the preparation of graphene n...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.cartre.2021.100054
Meng-jiang Cen, Yuan Liu, Xiang Chen • China Foundry
(2019)
This paper summarizes melting methods of titanium and titanium alloy, such as vacuum arc melting (VAR) and electron beam cold hearth melting (EBCHM), and the related inclusions formed when using these melting methods. Low-density inclusions...
DOAJ
Open Access (DOAJ)
DOI: 10.1007/s41230-019-9046-1
Yash Vishnoi, Alok Kumar Trivedi, M.K. Gupta, Harinder Singh et al. • Heliyon
(2024)
In the present decades, nanocellulose has been very popular in the field of nanotechnology and is receiving much attention from researchers because of its advantageous physicochemical properties, high aspect ratio, and high specific strengt...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2023.e23846
Seyedeh Alia Moosavian, Thozhukat Sathyapalan, Tannaz Jamialahmadi, Amirhossein Sahebkar • Bioinorganic Chemistry and Applications
(2021)
Nonalcoholic fatty liver disease (NAFLD) is a common chronic liver disease that can lead to end-stage liver disease needing a liver transplant. Many pharmacological approaches are used to reduce the disease progression in NAFLD. However, cu...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2021/4041415