Academic Articles & Research Papers

Effect of Corrosion Product Films Induced by Tensile Stress on P110 Casing Steels Induced in CO2 Environment

Corrosion product films were formed on P110 casing steels by high-temperature and high-pressure autoclave in a CO2 environment induced by tensile stress. The effects of applied tensile stress on the protection characteristics and electroche...

Effect of Prior Rolling on Microstructures and Property of Diffusion-Bonded Mg/Al Alloy

In this study, magnesium alloy AZ91, which was cast by double roll casting system, was rolled by a rolling mill. Then, rolled magnesium alloy and magnesium alloy without being rolled were, respectively, welded with aluminum alloy 6061 by di...

Study of the growth mechanism of a self-assembled and ordered multi-dimensional heterojunction at atomic resolution

Abstract Multi-dimensional heterojunction materials have attracted much attention due to their intriguing properties, such as high efficiency, wide band gap regulation, low dimensional limitation, versatility and scalability. To further imp...

Properties of aniline or O-phenylenediamine/YBCO hybrid materials

YBa2Cu3O7-δ(YBCO) bulk material prepared by high temperature solid state reaction was milled and dispersed through ultrasonic process in ethanol to prepare nanoscale YBCO/ethanol sol. Then it was mixed with aniline or O-phenylenediamine and...

Dynamic Assembly of Microgels and Polymers at Non‐Aqueous Liquid/Liquid Interfaces

Abstract Particle assembly at liquid–liquid interfaces presents a promising bottom‐up strategy for creating supramolecular materials with advanced functionalities. However, the significantly lower interfacial tension observed in immiscible ...

Adsorption of Nucleic Acid Bases, Ribose, and Phosphate by Some Clay Minerals

Besides having a large capacity for taking up organic molecules, clay minerals can catalyze a variety of organic reactions. Derived from rock weathering, clay minerals would have been abundant in the early Earth. As such, they might be expe...

A hybrid nanomodulator enables metabolic microenvironment remodeling for potent immunotherapy against lung adenocarcinoma

STING agonist-based immunotherapy holds considerable promise for cancer treatment, yet its efficacy against immunologically “cold” tumors such as lung adenocarcinoma (LUAD) remains markedly limited. A major obstacle lies in the highly glyco...

Microstructure and corrosion behavior of SLM–Ti6Al4V with different fabrication angles in F−-containing solutions

Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...

Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy

Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...

The Evolution of COVID-19 Transmission with Superspreaders Class under Classical and Caputo Piecewise Operators: Real Data Perspective from India, France, and Italy

In this study, we analyze the transmission of the COVID-19 model by using a piecewise operator in the classical Caputo sense. The existence along with the uniqueness of the solution of the COVID-19 model under a piecewise derivative is pres...

Fluoridobromate(V)–hydrogen fluoride cocrystallizates

Cocrystals of BrF5 and HF2− salts have been obtained for the first time in the form of the two compounds [NMe4][(BrF5)6(HF2)] and Cs2[(BrF5)6(HF2)(H2F3)]. These compounds are formed when hydrogen fluoride is present in reactions of BrF5 and...

Finite element analysis on the near field properties of metallic cavities with atomic sharpness

Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...

Pore structure and mechanical properties of directionally solidified porous aluminum alloys

Porous aluminum alloys produced by the metal-gas eutectic method or GASAR process need to be performed under a certain pressure of hydrogen, and to carry over melt to a tailor-made apparatus that ensures directional solidification. Hydrogen...

THE CHALLENGE OF ‘TECHNOLOGICAL CHOICES’FOR MATERIALS SCIENCE APPROACHES IN ARCHAEOLOGY*

Recently several anthropological and sociological studies have interpreted technologies as cultural choices that are determined as much by local perceptions and the social context fly any material constraints or purely functional criteria. ...

Introduction to materials science

The surface and materials science of tin oxide

Functionalization of polyoxometalates: towards advanced applications in catalysis and materials science

Functionalization via covalent grafting of organic functions allows to tune the redox and acid-base properties, and the solubility of polyoxometalates, to enhance their stability and biological activity and to reduce their toxicity, to faci...

Materials science of concrete

Prediction of a Portland Cement's Properties from its Chemical and Mineralogical Compositon. Tricalcium Silicate Hydration: A Historical Overview. Thermodynamics of Hydration Reactions. Tricalcium Silicate Hydration: A Historical Overview. ...

Materials science and engineering

a b s t r a c t The dislocation density and the Burgers vector population are determined within the Cu and Nb layers in highly textured sputter-deposited Cu-Nb multilayers by X-ray line profile analysis. The measurements are conducted with ...

Materials Science Foundations

Foundations of Materials Science and Engineering (FoMSE) is the successor journal of the former Materials Science Foundations (monograph series) Materials Science Foundations (monograph series) is the periodical edition which consists of se...