Reset
Showing 20 of 158 academic articles

Adaptive Tracking Control of Anchoring Unit for Pipeline Intelligent Plugging Robot Based on Improved Deep Deterministic Policy Gradient

Tingting Wu, Yaxin Liu, Laihe Qi, Pu Wang et al. • Machines (2026)

A pipeline intelligent plugging robot (PIPR) is an important tool in subsea pipeline maintenance and emergency repair. Precise position-tracking control is crucial for the in-pipe plugging operation of a PIPR. The anchoring module is the ke...

DOAJ Open Access (DOAJ) DOI: 10.3390/machines14060675

Exploring the Relative Importance and Interactive Impacts of Explanatory Variables of the Built Environment on Ride-Hailing Ridership by Using the Optimal Parameter-Based Geographical Detector (OPGD) Model

Zhenbao Wang, Shuyue Liu, Yuchen Zhang, Xin Gong et al. • Applied Sciences (2023)

The impact of the built environment on the ridership of ride-hailing results depends on the spatial grid scale. The existing research on the demand model of ride-hailing ignores the modifiable areal unit problem (MAUP). Taking Chengdu as an...

DOAJ Open Access (DOAJ) DOI: 10.3390/app13042180

A study on the Joule-Thomson effect of during filling hydrogen in high pressure tank

Ji-Qiang Li, Yan Chen, Yong Biao Ma, Jeong-Tae Kwon et al. • Case Studies in Thermal Engineering (2023)

With the development of the hydrogen fuel cell automobile industry, higher requirements are put forward for the construction of hydrogen energy infrastructure, the matching of parameters and the control strategy of hydrogen filling rate in ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2022.102678

Structure of Spatial Correlation Network and Influencing Factors of Urban-Rural Integration in China

Wang Kai, Liu Meilun, Tan Jiaxin, Gan Chang • Redai dili (2025)

Urban-rural integration is a necessary way to realize the strategy of rural revitalization in the new era, and exploring the characteristics of the spatial correlation network of China's urban-rural integration and its formation mechanism i...

DOAJ Open Access (DOAJ) DOI: 10.13284/j.cnki.rddl.20230678

Formulation optimization and flavor quality assessment of ginger tea

Shouhui Wei, Qiao Tan, Weining Wei, Hongbo Jiang et al. • Journal of Agriculture and Food Research (2026)

Ginger (Zingiber officinale Roscoe) is a characteristic economic crop with both medicinal and edible functions. The aroma and bioactive compounds in ginger tea are primarily derived from ginger. Developing a novel ginger tea with a rich aro...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jafr.2026.102977

Comparative Study of CUDA GPU Implementations in Python With the Fast Iterative Shrinkage-Thresholding Algorithm for LASSO

Younsang Cho, Jaeoh Kim, Donghyeon Yu • IEEE Access (2022)

A general-purpose GPU (GPGPU) is employed in a variety of domains, including accelerating the spread of deep natural network models; however, further research into its effective implementation is needed. When using the compute unified devic...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2022.3175987

Determination of Optimal Principal Ship Dimensions Considering EEDI and Operational Efficiency

Bo-Sung Jung, Seung-Ho Ham • Journal of Marine Science and Engineering (2026)

The determination of principal dimensions in the early ship design stage requires iterative calculations based on the basis ship particulars and ship owner’s requirements, demanding considerable time and engineering effort. In modern shipbu...

DOAJ Open Access (DOAJ) DOI: 10.3390/jmse14100939

Development of functional cookies form wheat-pumpkin seed based composite flour

Feriehiwote Weldeyohanis Gebremariam, Eneyew Tadesse Melaku, Venkatesa Prabhu Sundramurthy, Henock Woldemichael Woldemariam • Heliyon (2024)

To develop high quality cookies, even seemingly smallest changes depended on factors that can affect taste, texture, and nutritional value. In this light, this study aimed to investigate the upshot of refined wheat flour and pumpkin seed fl...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2024.e24443

Effects of different thermal processing methods on the flavor and precursor substances of the longissimus dorsi muscle in the “Duroc × Landrace × Yorkshire” ternary hybrid pigs

Xinran Yuan, Jialing Tang, Yulin Zhang, Zhengfeng Fang et al. • Food Chemistry: X (2026)

This study investigated the effects of boiling, frying, and roasting on flavor compounds and their precursors in the longissimus dorsi muscle of “Duroc × Landrace × Yorkshire” pigs. HS-SPME-GC–MS, electronic nose analysis, and multivariate ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.fochx.2026.103935

Gasification of Lignocellulosic Waste in Supercritical Water: Study of Thermodynamic Equilibrium as a Nonlinear Programming Problem

Julles Mitoura dos Santos Junior, Adriano Pinto Mariano • Eng (2024)

As one of the main industrial segments of the current geoeconomics scenario, agro-industrial activities generate excessive amounts of waste. The gasification of such waste using supercritical water (SCWG) has the potential to convert the wa...

DOAJ Open Access (DOAJ) DOI: 10.3390/eng5020060

Reducing Torque Ripple Through Innovative Configuration of Permanent Magnet Based on Air Gap Field Modulation Theory in a Novel Axial Flux Reversal Permanent Magnet Machine

Jilong Zhao, Qing Wang, Qingfeng Han • IEEE Access (2024)

In this paper, a novel axial flux reversal permanent magnet (PM) (AFRPM) machine, which combines the merit of the axial flux PM (AFPM) machine and flux reversal PM machine, is proposed. Meanwhile, according to the characteristics of the mac...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2024.3389699

Dynamic Behavior Improvement of Normally-Off p-GaN High-Electron-Mobility Transistor Through a Low-Temperature Microwave Annealing Process

Hsien-Chin Chiu, Chia-Hao Liu, Yi-Sheng Chang, Hsuan-Ling Kao et al. • IEEE Journal of the Electron Devices Society (2019)

The surface morphology optimization of ohmic contacts and the Mg out-diffusion suppression of normally off p-GaN gate high-electron-mobility transistors (HEMTs) continue to be challenges in the power electronics industry in terms of the hig...

DOAJ Open Access (DOAJ) DOI: 10.1109/JEDS.2019.2941519

Development, modelling and optimization of process parameters on the tensile strength of aluminum, reinforced with pumice and carbonated coal hybrid composites for brake disc application

Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports (2024)

Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-024-67476-x

Optimized two-stage process of Haematococcus sp. for enhanced astaxanthin and essential fatty acids accumulation

Pablo N. Refolio-Samperi, Elena Adaschewski, Dieter Hanelt, Abdelfatah Abomohra • Applied Food Research (2025)

The present study evaluated a two-stage process of Haematococcus sp. to enhance the nutritional value by astaxanthin and fatty acid accumulation. Initial screening of different growth media during the green stage, focusing on enhanced bioma...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.afres.2025.101144

On Security and Throughput for Energy Harvesting Untrusted Relays in IoT Systems Using NOMA

Van Nhan Vo, Chakchai So-In, Hung Tran, Duc-Dung Tran et al. • IEEE Access (2019)

In this paper, we analyze the secrecy and throughput of multiple-input single-output (MISO) energy harvesting (EH) Internet of Things (IoT) systems, in which a multi-antenna base station (BS) transmits signals to IoT devices (IoTDs) with th...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2019.2946600

Tribological and flexural characterization of dissimilar AA2024-T3/AA6082-T6 friction stir welded joints

Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology (2026)

The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.08.256

User perspectives on AI explainability in aerospace manufacturing: a Card-Sorting study

Sofia Morandini, Federico Fraboni, Mark Hall, Santiago Quintana-Amate et al. • Frontiers in Organizational Psychology (2025)

The integration of AI technologies in aerospace manufacturing is significantly transforming critical operational processes, impacting decision-making, efficiency, and workflow optimization. Explainability in AI systems is essential to ensur...

DOAJ Open Access (DOAJ) DOI: 10.3389/forgp.2025.1538438

Optimization of Metal Inert Gas Welding Process during Joining of Structural Steels- An Overview

Misra Ravindra Kumar, Porwal Rajesh Kumar • E3S Web of Conferences (2020)

Metal Inert Gas welding is a fast, reliable and cost effective technique for joining of different ferrous materials and steels used in the construction of large structures like Fe410WA, IS2062, SS304, AISI1040 and AISI316 etc. To obtain bet...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202018401028

Optimization of Bacillus cereus Fermentation Process for Selenium Enrichment as Organic Selenium Source

Xujun Chen, Shuyi Li, Xin Cong, Xin Cong et al. • Frontiers in Nutrition (2020)

Selenium is an essential trace element and micronutrient for human health. Application of organic selenium in plants and microorganisms as trace element supplement is attracting more and more attention. In this study, Bacillus cereus, an im...

DOAJ Open Access (DOAJ) DOI: 10.3389/fnut.2020.543873

Optimization of lactic fermentation parameters of sugar beet (Beta vulgaris L.) puree with Lactobacillus plantarum and Lactobacillus casei

S. Khalajian, N. Mooraki, M. Honarvar, A. Akhavan Sepahi • Applied Food Research (2026)

This research investigates the lactic fermentation process of sugar beet (Beta vulgaris L.) puree with the aim of creating a functional probiotic product. The focus is on optimizing fermentation conditions to enhance health benefits, thereb...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.afres.2026.101754