Reset
Showing 20 of 2,969 academic articles

Self, Society, and the "New Gerontology"

Martha Holstein, Meredith Minkler • The Gerontologist (2003)

The "new gerontology," built on the concept of successful aging, sets forth the preconditions for and the end product of the process of aging successfully. Focused on health and active participation in life, it vests largely within individu...

OPENALEX DOI: https://doi.org/10.1093/geront/43.6.787

Breaking of Thermopower–Conductivity Trade‐Off in LaTiO3 Film around Mott Insulator to Metal Transition

Takayoshi Katase, Xinyi He, Terumasa Tadano, Jan M. Tomczak et al. • Advanced Science (2021)

Abstract Introducing artificial strain in epitaxial thin films is an effective strategy to alter electronic structures of transition metal oxides (TMOs) and to induce novel phenomena and functionalities not realized in bulk crystals. This s...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202102097

One-step fabrication of superhydrophobic fabrics with stable mechanical performance in harsh conditions

Zhuoxing Liu, Kexin Zhao, Jie Ma, Shijie Liu et al. • Nature Communications (2026)

Abstract Developing robust water-repellent textiles is critical for outdoor, protective, and industrial applications. However, achieving long-lasting water repellency under mechanical stress remains a significant challenge. Conventional app...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41467-026-70857-7

Improved object detection method for autonomous driving based on DETR

Huaqi Zhao, Songnan Zhang, Xiang Peng, Zhengguang Lu et al. • Frontiers in Neurorobotics (2025)

Object detection is a critical component in the development of autonomous driving technology and has demonstrated significant growth potential. To address the limitations of current techniques, this paper presents an improved object detecti...

DOAJ Open Access (DOAJ) DOI: 10.3389/fnbot.2024.1484276

Investigation of the Structural, Electrical, and Optical Properties of the Nano-Scale GZO Thin Films on Glass and Flexible Polyimide Substrates

Fang-Hsing Wang, Kun-Neng Chen, Chao-Ming Hsu, Min-Chu Liu et al. • Nanomaterials (2016)

In this study, Ga2O3-doped ZnO (GZO) thin films were deposited on glass and flexible polyimide (PI) substrates at room temperature (300 K), 373 K, and 473 K by the radio frequency (RF) magnetron sputtering method. After finding the depositi...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano6050088

Thermoelectric properties of high pressure synthesized lithium and calcium double-filled CoSb3

Xiaohui Li, Yulong Kang, Chen Chen, Jianghua Li et al. • AIP Advances (2017)

Lithium and calcium are inefficient filling elements of CoSb3 at ambient pressure, but show nice filling behavior under high pressure. In this work, we synthesized Li/Ca double-filled CoSb3 with high pressure synthesis method. The products ...

DOAJ Open Access (DOAJ) DOI: 10.1063/1.4974501

Study of the growth mechanism of a self-assembled and ordered multi-dimensional heterojunction at atomic resolution

Zunyu Liu, Chaoyu Zhao, Shuangfeng Jia, Weiwei Meng et al. • Frontiers of Optoelectronics (2023)

Abstract Multi-dimensional heterojunction materials have attracted much attention due to their intriguing properties, such as high efficiency, wide band gap regulation, low dimensional limitation, versatility and scalability. To further imp...

DOAJ Open Access (DOAJ) DOI: 10.1007/s12200-023-00091-2

Properties of aniline or O-phenylenediamine/YBCO hybrid materials

LIN Shan, YUAN Hong-mei, WANG Dong, CHEN Shu-qing et al. • Cailiao gongcheng (2021)

YBa2Cu3O7-δ(YBCO) bulk material prepared by high temperature solid state reaction was milled and dispersed through ultrasonic process in ethanol to prepare nanoscale YBCO/ethanol sol. Then it was mixed with aniline or O-phenylenediamine and...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2019.000902

Dynamic Assembly of Microgels and Polymers at Non‐Aqueous Liquid/Liquid Interfaces

Xin Guan, Yang Liu, Lianwei Li, Man‐Hin Kwok et al. • Advanced Science (2025)

Abstract Particle assembly at liquid–liquid interfaces presents a promising bottom‐up strategy for creating supramolecular materials with advanced functionalities. However, the significantly lower interfacial tension observed in immiscible ...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202415642

Information-analytical aspects of the reception organisation of powder microcomposites on an iron basis

A.V. LYULKO, V.V. GRITSENKO, B.B. JMAILOV, V.G. LYULKO • Вестник Донского государственного технического университета (2018)

The basic stages of a complex development direction of a science and practice of powder metallurgy as method of information-analytical representation of its basic aspects are presented. The basic algorithm of carrying out of operations and ...

DOAJ Open Access (DOAJ)

Lysosome blockade induces divergent metabolic programs in macrophages and tumours for cancer immunotherapy

Jing Ma, Ruijuan Ma, Xueke Zeng, Liming Zhang et al. • Journal of Experimental & Clinical Cancer Research (2023)

Abstract Background Platinum-drugs based chemotherapy in clinic increases the potency of tumor cells to produce M2 macrophages, thus leading to poor anti-metastatic activity and immunosuppression. Lysosome metabolism is critical for cancer ...

DOAJ Open Access (DOAJ) DOI: 10.1186/s13046-023-02768-0

Experimental study on unloading induced shear performances of 3D saw-tooth rock fractures

Qian Yin, Xinxin Nie, Jiangyu Wu, Qi Wang et al. • International Journal of Mining Science and Technology (2023)

A fractal model governing saw-tooth fractures was first introduced to replicate sandstone samples containing an inclined 3D penetrating rough fracture surface with various joint roughness coefficients (JRC). In conventional triaxial compres...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ijmst.2023.02.002

Finite element analysis on the near field properties of metallic cavities with atomic sharpness

Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics (2023)

Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2023.106360

Materials science and engineering

CA (United States) Lawrence Livermore National Lab., D Lesuer, USDOE, Washington, DC (United States) (1997)

During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material proces...

OPENALEX Open Access DOI: https://doi.org/10.2172/623044

Practical Handbook of Materials Science

Charles W. Lynch • CRC Press eBooks (1989)

CRC Practical Handbooks are a series of single-volume bench manuals that feature a synthesis of frequently used, basic reference information. These highly abridged versions of existing CRC multi-volume Handbooks contain largely tabular and ...

OPENALEX DOI: https://doi.org/10.1201/9781003041047

Effect of Heat Input on Microstructure and Hardness Distribution of Laser Welded Si-Al TRIP-Type Steel

Adam Grajcar, Maciej Różański, Sebastian Stano, Aleksander Kowalski et al. • Advances in Materials Science and Engineering (2014)

This study is concerned with issues related to laser welding of Si-Al type TRIP steels with Nb and Ti microadditions. The tests of laser welding of thermomechanically rolled sheet sections were carried out using keyhole welding and a solid-...

DOAJ Open Access (DOAJ) DOI: 10.1155/2014/658947

Simulation and experimental verification of the edge effect of composites on the infiltration process of RTM forming

ZHU Hongye, WANG Xiaoxu, LYU Jixiang, HAO Shulei • Xi'an Gongcheng Daxue xuebao (2025)

To study the influence of edge effects on the resin filling flow pattern in the RTM process of composite materials, the finite element software PAM-RTM was used to simulate and analyze the impregnation process of the blade preforms in RTM.B...

DOAJ Open Access (DOAJ) DOI: 10.13338/j.issn.1674-649x.2025.04.002