Home »
Academic Articles & Research Papers
Showing 20 of 100 academic articles
Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment
(2023)
3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.dibe.2023.100295
Wuwei Feng, Hongya Chen, Qingping Zou, Di Wang et al. • Energies
(2024)
Wireless monitoring systems for the marine environment are important for rapidly growing subsea developments. The power supply of wireless sensor nodes within the monitoring systems, however, is a major challenge. This study proposes a nove...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/en17040876
X.B. Ye, B.C. Pan • Nuclear Materials and Energy
(2023)
Since tungsten (W) was considered as the most promising plasma facing materials (PFMs) in fusion reactors, there has been extensive research on the physical performance of W-PFMs. It is found that under the extreme conditions in a fusion re...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.nme.2023.101447
Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology
(2026)
The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2026.08.256
Shangkai Liu, Kai Tong, Fengmin Chen, Senhua Zhang et al. • Buildings
(2026)
The reliability of high-strength bolted connections is critical to the safety of large-scale engineering structures. This study proposes a non-contact quantitative method for detecting bolt loosening based on the self-magnetic flux leakage ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/buildings16030497
Chia-Nan Wang, Khanh-Mai Tran, Ching-Chien Huang, Yen-Hui Wang et al. • Systems
(2022)
The current COVID-19 pandemic, which is alarming for another global economic recession, puts the sustainable development of the tourism system under high consideration. The tourism industry is a key generator of foreign exchange across the ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/systems10020033
Misra Ravindra Kumar, Porwal Rajesh Kumar • E3S Web of Conferences
(2020)
Metal Inert Gas welding is a fast, reliable and cost effective technique for joining of different ferrous materials and steels used in the construction of large structures like Fe410WA, IS2062, SS304, AISI1040 and AISI316 etc. To obtain bet...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/e3sconf/202018401028
Muhammad Jawad, Saurabh Bhatia, Ahmed Al-Harrasi, Sana Ullah et al. • Heliyon
(2024)
The study examined the antimicrobial and antioxidant potential of pure Acetyl-11-keto-β-boswellic acid (AKBA), boswellic acid (70%) and AKBA loaded nanoparticles as topical polymeric films. The optimized concentration (0.05 % w/v) of pure A...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2024.e31671
S. Mazerat, R. Pailler • Data in Brief
(2020)
Due to their high specific strength at elevated temperatures and resistance to oxidative environments, SiC-based fibers are of great interest for the reinforcement of ceramic matrix composites. They are however subjected to a slow crack gro...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.dib.2020.106166
M. Vinod, B. S. Nithyananda, Shrishail B. Sollapur, Satish Gajbhiv et al. • Scientific Reports
(2026)
Abstract This work examined the role of alkaline and epoxy-based surface chemical treatments on the mechanical and thermal properties of flax fiber reinforced Aluminum Alloy 6082 hybrid Fiber Metal Laminates (FMLs), integrated with machine ...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-026-58852-w
Jian Yang, Lei Zhang, Jun Zhang, Hao Wang et al. • Actuators
(2023)
In this study, the mechanical models of a multilayer combined extrusion cylinder and a steel-wire-winding extrusion cylinder were established and compared using a finite element simulation and existing experimental cases. This work provides...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/act12100369
BIN Shibo; XIE Yunhe; ZHENG Weiguang; WEI Shangjun; GAO Ting; LIU Xuewen • Nantong Daxue xuebao. Ziran kexue ban
(2025)
Low-frequency road noise is a primary contributor to in-cabin noise and directly affects overall vehicle comfort. With the rapid development of electric vehicles, this issue has attracted increasing attention from the automotive industry. T...
DOAJ
Open Access (DOAJ)
DOI: 10.12194/j.ntu.20240724001
Qimao Liu, Jing Zhang, Liubin Yan • Shock and Vibration
(2012)
This paper developed an effective optimization method, i.e., gradient-Hessian matrix-based method or second order method, of frame structures subjected to the transient loads. An algorithm of first and second derivatives of dynamic displace...
DOAJ
Open Access (DOAJ)
DOI: 10.3233/SAV-2012-0685
Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development
(2024)
This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...
DOAJ
Open Access (DOAJ)
DOI: 10.21608/ijisd.2024.302067.1074
Shuhai Huang, Cheng Chang, Jiaqi Liu, Shouwei Tong et al. • Crystals
(2023)
A composite groove structure with high specific strength and light weight has great potential in industrial application, but few studies on this have been carried out due to the fact that it is difficult to fabricate by one of the existing ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/cryst13121644
Qiu Yin, Yucheng Luo, Xianglin Yu, Keke Chen et al. • Advanced Science
(2024)
Abstract Cell‐laden hydrogel fibers/tubules are one of the fundamentals of tissue engineering. They have been proven as a promising method for constructing biomimetic tissues, such as muscle fibers, nerve conduits, tendon and vessels, etc. ...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/advs.202308396
Tom Vandebroek, Julie Legrand, Tom Vercauteren, Sebastien Ourselin et al. • Advances in Mechanical Engineering
(2023)
Single port access surgery has brought many advantages and new challenges to the field of minimally invasive surgery. In principle, many of these challenges can be addressed through robotics. Continuum robots in particular have seen a surge...
DOAJ
Open Access (DOAJ)
DOI: 10.1177/16878132221140207
Ye Rim Lee, Justin Neubauer, Kwang Jin Kim, Youngsu Cha • Sensors
(2020)
A common design concept of the piezoelectric force sensor, which is to assemble a bump structure from a flat or fine columnar piezoelectric structure or to use a specific type of electrode, is quite limited. In this paper, we propose a new ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/s20174840
Xiaoxiao Dong, Hong Zhao, Jiapeng Li, Yu Tian et al. • iScience
(2020)
Summary: Nature does nothing in vain. Through millions of years of revolution, living organisms have evolved hierarchical and anisotropic structures to maximize their survival in complex and dynamic environments. Many of these structures ar...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.isci.2020.101749
Lorenzo Bonetti, Daniele Natali, Stefano Pandini, Massimo Messori et al. • Materials & Design
(2024)
This paper introduces a novel approach to 4D printing tailored structures with reversible two-way shape-memory effect (SME) through material extrusion technology. To this aim, methacrylated poly(ε-caprolactone) (PCL) was synthesized and eva...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2024.112725