Home »
Academic Articles & Research Papers
Showing 20 of 8,605 academic articles
Stefano Filippi, Daniela Barattin • Cogent Engineering
(2019)
The literature offers methods and tools for user experience (UX) evaluation. Among them, the irMMs-based method exploits mental models related to specific situations of interaction. The literature also proposes frameworks and models to desc...
DOAJ
Open Access (DOAJ)
DOI: 10.1080/23311916.2019.1576318
Miroslav Variny, Marianna Kšiňanová, Patrik Furda • Engineering Proceedings
(2023)
Trigeneration provides an effective means of power, heat, and cold production on site. Proper design and well-managed operation of such units can bring in substantial savings in consumed primary energy as well as in the amount of greenhouse...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/ASEC2023-15409
Le-Yan Shi, Tien-Li Chen, Chih-Hao Chen, Kun-Ching Cho • International Journal of Photoenergy
(2013)
This study intends to develop the electrolyte needed in dye-sensitized solar cells (DSSCs). Moreover, three different ionic liquids in different molalities are added to the gel-type electrolyte. Experimental results show that the DSSC compo...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2013/834184
Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology
(2026)
This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2026.09.145
Gabriel Marcel-Boghian • Journal of Industrial Design and Engineering Graphics
(2016)
In the present paper is defined and presented the method of representation of an automotive transmission using CATIA V5 software, having as reference the Dacia Duster automobile. This paper contains the steps required for 3D modeling of tra...
DOAJ
Open Access (DOAJ)
Shwetha Singaram, Claude-Hélène Mayer • Frontiers in Psychology
(2022)
The Fourth Industrial Revolution (4IR) is known to transform and create opportunities for the world of work. However, little is known about how the future workforce, such as university students, are being equipped and exposed to 4IR technol...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fpsyg.2022.919157
Rašuo Boško, Dinulović Mirko, Trninić Marta, Stamenović Marina et al. • FME Transactions
(2021)
Noise is becoming one of the problems in many industrial applications. In this paper the aerodynamic noise in air duct system that arises from air flow passing over a surface of turning vanes is investigated. Based on Proudman's formula usi...
DOAJ
Open Access (DOAJ)
DOI: 10.5937/fme2102308R
Jianlin LI, Yuxin YU, Zhonghao LIANG, Yun LIU • 分布式能源
(2026)
Hydrogen energy, as a core area in global energy transition and low-carbon development, plays a critical role in supporting industrial innovation and talent cultivation through discipline construction. Universities and research institutions...
DOAJ
Open Access (DOAJ)
DOI: 10.16513/j.2096-2185.DE.25100423
Alan Marshall • Diseña
(2018)
The Fantasy Method of Urban Design is an experimental cross-disciplinary method that aims to predict the future social and technological forces impacting upon our cities, and to design such cities in line with these predictions. Utilizing f...
DOAJ
Open Access (DOAJ)
Haihong Chen, Bing Xu, Yi Wang, Wei Li et al. • Food Science and Human Wellness
(2023)
With changing dietary habits and increasing awareness of the nutraceutical role of dietary foods, the demand for natural plant proteins and interest in non-traditional protein sources in the food industry are increasing. Industrial hemp, be...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.fshw.2022.10.016
CHEN Yao, XIONG Zhenghui, LUO Junwei, WANG Hanyang et al. • Journal of Aeronautical Materials
(2025)
Traditional ultrasonic automated non-destructive testing is a great challenge in the inspection of aviation components with complex surfaces. Complex surfaces can interfere with the formation of the focus in the sound beam,and the waveform ...
DOAJ
Open Access (DOAJ)
DOI: 10.11868/j.issn.1005-5053.2024.000173
Tomohiro Furuki, Tomohiro Nobeyama, Shunji Suetaka, Ryokei Matsui et al. • Food Chemistry: X
(2024)
Reentrant condensation (RC) is a protein behavior in which the protein solution shifts between the one- and two-phase state more than twice by increasing a single parameter. Although RC would be a candidate mechanism for the physicochemical...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.fochx.2024.101165
Reshetnikov I.F., Shikhalev S.V., Tikhonov S.L. • Problems of the Regional Energetics
(2018)
The aim of the article is a quantitative assessment of the influence of non-condensable gases on the intensity of heat and mass transfer processes during film condensation of steam in the specific conditions for heat exchanger. The task is ...
DOAJ
Open Access (DOAJ)
DOI: 10.5281/zenodo.2222362
Dmitry Mikhaylyuk / Дмитрий Павлович Михайлюк, Amir Kader / Амир Святославович Кадер • Индустрии впечатлений: Технологии социокультурных исследований
(2025)
The aim of the research is to identify the evolutionary scenario and the specifics of the transformation of the child's image in Russian art, primarily using Soviet cinema as an example, taking into account the experience of world art devel...
DOAJ
Open Access (DOAJ)
DOI: 10.34680/EISCRT-2025-4(13)-52-95
Caricato A., Ficarella A., Chiodo L. Spada • E3S Web of Conferences
(2021)
Predictive maintenance is the latest frontier in the management and maintenance of many industrial assets, including aeroengines. Made possible by last decades advances in monitoring equipment and machine learning algorithms, it permits ind...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/e3sconf/202131211017
Preetaman Bajwa, Rupinder Saini, Sukhbir Singh, Jasleen Makkar et al. • Agrosystems, Geosciences & Environment
(2025)
Abstract Industrial hemp is receiving attention for its numerous benefits, particularly in the fiber industry. Weed competition is a primary concern for hemp cultivation, causing reduced yields and inferior‐quality fiber. However, little is...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/agg2.70078
Beatryz C. Mendes, Leonardo G. Pedroti, Carlos Maurício F. Vieira, José Maria F. Carvalho et al. • Case Studies in Construction Materials
(2022)
Geopolymers are binder materials that can be an alternative to replace Portland cement. They are considered less aggressive to the environment because of the lower emission of CO2 and use of energy in their production chain. This work aimed...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.cscm.2021.e00847
Hüseyin Peker, Ümit Ayata, Göksel Ulay • Drewno
(2025)
Scots pine wood represents one of the important tree species used by the wood processing industry in many countries for both interior and exterior applications. It is well known that thermal treatment alters the color of wood. To protect wo...
DOAJ
Open Access (DOAJ)
DOI: 10.53502/wood-201974
Enis Ben Bnina, Jihen Missaoui, Mohamed Firas Gannouni, Lotfi Achour et al. • OpenNano
(2026)
Food safety and control are fundamental public health issues that maintain consumer confidence and protection. This design (management) requires monitoring production, processing, and conservation processes while limiting microbiological, c...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.onano.2026.100286
Yi Fang, Guo-Niu Zhu, Yudi Zhao, Chaochen Gu • Applied Sciences
(2023)
High-speed motions performed by industrial machines can induce severe vibrations that degrade the positioning accuracy and efficiency. To address this issue, this paper proposes a novel motion profile design method utilizing a sinusoidal je...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app132413320