Reset
Showing 20 of 757 academic articles

Pressure Effects on Monolayer FeCl2: Above‐Room‐Temperature Ferromagnetism with In‐Plane Electric Polarization and Interface‐Free Magnetic Tunnel Junctions

Shubham Tyagi, Paresh C. Rout, Shubham Singh, Udo Schwingenschlögl • Advanced Electronic Materials (2026)

ABSTRACT We investigate the influence of hydrostatic pressure on the physical properties of monolayer FeCl2 for spintronics applications. A phase transition from a ferromagnetic half‐metal to a ferromagnetic semiconductor is unveiled at 4.6...

DOAJ Open Access (DOAJ) DOI: 10.1002/aelm.202500230

A review on green synthesis of ZnO nanoparticles

Madhusmita Swain, Durgamadhab Mishra, Gourishankar Sahoo • Discover Applied Sciences (2025)

Abstract Nanoparticles and Nanostructured materials are playing an ever-important role in affordable healthcare, environment remediation, renewable energy, agriculture, consumer electronics, cosmetics etc. However, progress in these sectors...

DOAJ Open Access (DOAJ) DOI: 10.1007/s42452-025-06957-8

Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy

Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版 (2017)

Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...

DOAJ Open Access (DOAJ) DOI: 10.3969/J.ISSN.1000-5137.2017.06.006

Finite element analysis on the near field properties of metallic cavities with atomic sharpness

Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics (2023)

Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2023.106360

Functionalization of polyoxometalates: towards advanced applications in catalysis and materials science

Anna Proust, René Thouvenot, Pierre Gouzerh • Chemical Communications (2008)

Functionalization via covalent grafting of organic functions allows to tune the redox and acid-base properties, and the solubility of polyoxometalates, to enhance their stability and biological activity and to reduce their toxicity, to faci...

OPENALEX DOI: https://doi.org/10.1039/b715502f

Materials science of concrete

Jan P. Skalny, Sidney Mindess, Francis Young • American Ceramic Society eBooks (1989)

Prediction of a Portland Cement's Properties from its Chemical and Mineralogical Compositon. Tricalcium Silicate Hydration: A Historical Overview. Thermodynamics of Hydration Reactions. Tricalcium Silicate Hydration: A Historical Overview. ...

OPENALEX

Materials Science Foundations

• Materials science foundations (2016)

Foundations of Materials Science and Engineering (FoMSE) is the successor journal of the former Materials Science Foundations (monograph series) Materials Science Foundations (monograph series) is the periodical edition which consists of se...

OPENALEX DOI: https://doi.org/10.4028/www.scientific.net/msfo

The Coming of Materials Science

David A. Weitz • Physics Today (2002)

The Coming of Materials Science , Robert W. Cahn Pergamon, New York, 2001. $64.00 (568 pp.). isbn 0-08-042679-4 If one takes the broadest view, a significant fraction of modern-day physicists are materials scientists. Similarly, many chemis...

OPENALEX Open Access DOI: https://doi.org/10.1063/1.1496379

Materials science and engineering

CA (United States) Lawrence Livermore National Lab., D Lesuer, USDOE, Washington, DC (United States) (1997)

During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material proces...

OPENALEX Open Access DOI: https://doi.org/10.2172/623044

Materials Science and Engineering

Lashawn M. Gehrig, Xinyu Hu • Trans Tech Publications Ltd. eBooks (2023)

This edition presents the articles devoted mainly to materials processing technologies of steel and alloys, materials properties and advanced manufacturing technologies in the related fields of materials. All of them were selected from the ...

OPENALEX DOI: https://doi.org/10.4028/b-56k662

Practical Handbook of Materials Science

Charles W. Lynch • CRC Press eBooks (1989)

CRC Practical Handbooks are a series of single-volume bench manuals that feature a synthesis of frequently used, basic reference information. These highly abridged versions of existing CRC multi-volume Handbooks contain largely tabular and ...

OPENALEX DOI: https://doi.org/10.1201/9781003041047

Principles of Materials Science and Engineering

William F. Smith • Journal of International Crisis and Risk Communication Research (1986)

This book attempts to provide basic knowledge about the structure, properties, and processing of engineering materials and their applications. The first chapter gives an introduction to materials science and engineering and briefly describe...

OPENALEX Open Access

Big data and machine learning for materials science

Jose Fernando Rodrigues Junior, Larisa Florea, Maria Cristina Ferreira de Oliveira, Dermot Diamond et al. • Discover Materials (2021)

Herein, we review aspects of leading-edge research and innovation in materials science that exploit big data and machine learning (ML), two computer science concepts that combine to yield computational intelligence. ML can accelerate the so...

OPENALEX cc-by DOI: https://doi.org/10.1007/s43939-021-00012-0 PMC: 8054236

Materials science of DNA

Young‐Wan Kwon, Chang Hoon Lee, Dong-Hoon Choi, Jung Il Jin • Journal of Materials Chemistry (2008)

This article critically reviews the emerging field of DNA materials science, which is expected to add a new horizon to the conventional materials science landscape. The introduction provides a short overview on recent developments in the no...

OPENALEX DOI: https://doi.org/10.1039/b808030e

Materials for Total Hip Joint Prostheses: Biaxial Flexural Strength of Two Ceramic Systems

Bojana TABAKOVA, Ivanka KALIMANOVA, Ina YANKOVA, Hristiana NIKOLOVA • The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science (2010)

Total hip joint replacement is one of the most successful orthopaedic surgeries in the last decade. Essential part of total hip joint prostheses is the mobile joint “hemispherical head - hemispherical cup”. Functional properties and durabil...

DOAJ Open Access (DOAJ)

Twins‐like nanodrugs synchronously transport in blood and coalesce inside tumors for sensitive ultrasound imaging and triggerable penetrative drug delivery

Yujun Cai, Gengjia Chen, Minzhao Lin, Bo Li et al. • Aggregate (2024)

Abstract Nanodrugs capable of aggregating in the tumor microenvironment (TME) have demonstrated great efficiency in improving the therapeutic outcome. Among various approaches, the strategy utilizing electrostatic interaction as a driving f...

DOAJ Open Access (DOAJ) DOI: 10.1002/agt2.476

External Thermal Insulation Composite Systems: Critical Parameters for Surface Hygrothermal Behaviour

Eva Barreira, Vasco P. de Freitas • Advances in Materials Science and Engineering (2014)

External Thermal Insulation Composite Systems (ETICS) are often used in Europe. Despite its thermal advantages, low cost, and ease of application, this system has serious problems of biological growth causing the cladding defacement. Recent...

DOAJ Open Access (DOAJ) DOI: 10.1155/2014/650752