Reset
Showing 20 of 5,444 academic articles

Statistical Optimization of Medium for Pullulan Production by Aureobasidium pullulans NCPS2016 Using Fructose and Soybean Meal Hydrolysates

Jinyu Yang, Yanhao Zhang, Shuangzhi Zhao, Qingxin Zhou et al. • Molecules (2018)

Pullulan, with its excellent characteristics of film-forming, water solubility, and biodegradability, is attracting more and more attention in agricultural products preservation. However, high pullulan production cost largely restricts its ...

DOAJ Open Access (DOAJ) DOI: 10.3390/molecules23061334

Predicting Water Flux in Forward Osmosis with Unknown Feed Solution Composition: An Empirical Approach Based on Thermodynamical Properties

Bastian Greisner, Dieter Mauer, Frank Rögener, André Lerch • Membranes (2023)

This study investigated the predictability of forward osmosis (FO) performance with an unknown feed solution composition, which is important in industrial applications where process solutions are concentrated but their composition is unknow...

DOAJ Open Access (DOAJ) DOI: 10.3390/membranes13040427

Synthesis and Characterization of a Gel-Type Electrolyte with Ionic Liquid Added for Dye-Sensitized Solar Cells

Le-Yan Shi, Tien-Li Chen, Chih-Hao Chen, Kun-Ching Cho • International Journal of Photoenergy (2013)

This study intends to develop the electrolyte needed in dye-sensitized solar cells (DSSCs). Moreover, three different ionic liquids in different molalities are added to the gel-type electrolyte. Experimental results show that the DSSC compo...

DOAJ Open Access (DOAJ) DOI: 10.1155/2013/834184

Comparative investigation of similar and dissimilar AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced by continuous-drive friction welding

Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology (2026)

This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.09.145

The influence of the Fourth Industrial Revolution on organisational culture: An empirical investigation

Shwetha Singaram, Claude-Hélène Mayer • Frontiers in Psychology (2022)

The Fourth Industrial Revolution (4IR) is known to transform and create opportunities for the world of work. However, little is known about how the future workforce, such as university students, are being equipped and exposed to 4IR technol...

DOAJ Open Access (DOAJ) DOI: 10.3389/fpsyg.2022.919157

A study of aerodynamic noise in air duct systems with turning vanes

Rašuo Boško, Dinulović Mirko, Trninić Marta, Stamenović Marina et al. • FME Transactions (2021)

Noise is becoming one of the problems in many industrial applications. In this paper the aerodynamic noise in air duct system that arises from air flow passing over a surface of turning vanes is investigated. Based on Proudman's formula usi...

DOAJ Open Access (DOAJ) DOI: 10.5937/fme2102308R

The Fantasy Method of Urban Design

Alan Marshall • Diseña (2018)

The Fantasy Method of Urban Design is an experimental cross-disciplinary method that aims to predict the future social and technological forces impacting upon our cities, and to design such cities in line with these predictions. Utilizing f...

DOAJ Open Access (DOAJ)

Application of Functional Nanomaterials in Aesthetic Art and Industrial Design Concept

Da Gong, Zhenghang Li, Yuyan Song, Jiaheng Han • Advances in Materials Science and Engineering (2022)

Industrial design (ID) refers to industrial product design based on engineering, aesthetics, and economy. Traditional industrial design refers to the creative activities of designing and designing products produced by industrial means to ma...

DOAJ Open Access (DOAJ) DOI: 10.1155/2022/9334608

Influence of Non - Condensable Gases on the Processes of Heat and Mass Transfer during Film Condensation of Steam in Heat Exchangers

Reshetnikov I.F., Shikhalev S.V., Tikhonov S.L. • Problems of the Regional Energetics (2018)

The aim of the article is a quantitative assessment of the influence of non-condensable gases on the intensity of heat and mass transfer processes during film condensation of steam in the specific conditions for heat exchanger. The task is ...

DOAJ Open Access (DOAJ) DOI: 10.5281/zenodo.2222362

Childhood under the scope of time: the 20th-century child in the aesthetics of Neorealism and Soviet cinema / Детство под прицелом времени: ребенок ХХ века в киноэстетике неореализма и советском кинематографе

Dmitry Mikhaylyuk / Дмитрий Павлович Михайлюк, Amir Kader / Амир Святославович Кадер • Индустрии впечатлений: Технологии социокультурных исследований (2025)

The aim of the research is to identify the evolutionary scenario and the specifics of the transformation of the child's image in Russian art, primarily using Soviet cinema as an example, taking into account the experience of world art devel...

DOAJ Open Access (DOAJ) DOI: 10.34680/EISCRT-2025-4(13)-52-95

Prognostic techniques for aeroengine health assessment and Remaining Useful Life estimation

Caricato A., Ficarella A., Chiodo L. Spada • E3S Web of Conferences (2021)

Predictive maintenance is the latest frontier in the management and maintenance of many industrial assets, including aeroengines. Made possible by last decades advances in monitoring equipment and machine learning algorithms, it permits ind...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202131211017

Effect of early and late post emergence herbicides on weed suppression, crop injury, and biomass yield of industrial hemp in semiarid conditions

Preetaman Bajwa, Rupinder Saini, Sukhbir Singh, Jasleen Makkar et al. • Agrosystems, Geosciences & Environment (2025)

Abstract Industrial hemp is receiving attention for its numerous benefits, particularly in the fiber industry. Weed competition is a primary concern for hemp cultivation, causing reduced yields and inferior‐quality fiber. However, little is...

DOAJ Open Access (DOAJ) DOI: 10.1002/agg2.70078

Evaluation of eco-efficient geopolymer using chamotte and waste glass-based alkaline solutions

Beatryz C. Mendes, Leonardo G. Pedroti, Carlos Maurício F. Vieira, José Maria F. Carvalho et al. • Case Studies in Construction Materials (2022)

Geopolymers are binder materials that can be an alternative to replace Portland cement. They are considered less aggressive to the environment because of the lower emission of CO2 and use of energy in their production chain. This work aimed...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.cscm.2021.e00847

EFFECT OF COVID-19 ON PSYCHOSOCIAL BEHAVIOUR OF AUTOMOBILE WORKERS PERFORMANCE - AN ERGONOMIC STUDY

Syam Babu Bokka, Anil Kumar Birru, Amandeep Kaur, Netai Chandr Dey et al. • Proceedings on Engineering Sciences (2024)

The COVID-19 lockdown has had a significant negative impact on the automotive industry, particularly on the small and medium-sized businesses and daily wage workers who rely on autonagar industrial area as their main source of income. Emplo...

DOAJ Open Access (DOAJ) DOI: 10.24874/PES.SI.25.03b.010

Effect of Thermal Modification and Picture Varnish Application on Color Change of Scots Pine (Pinus sylvestris L.) Wood

Hüseyin Peker, Ümit Ayata, Göksel Ulay • Drewno (2025)

Scots pine wood represents one of the important tree species used by the wood processing industry in many countries for both interior and exterior applications. It is well known that thermal treatment alters the color of wood. To protect wo...

DOAJ Open Access (DOAJ) DOI: 10.53502/wood-201974

Formulation, characterization, and valorization of the antioxidant, antibiofilm, and anti-adhesion potentials of a clove essential oil nanoemulsion

Enis Ben Bnina, Jihen Missaoui, Mohamed Firas Gannouni, Lotfi Achour et al. • OpenNano (2026)

Food safety and control are fundamental public health issues that maintain consumer confidence and protection. This design (management) requires monitoring production, processing, and conservation processes while limiting microbiological, c...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.onano.2026.100286

Nanosized Cubosomal Thermogelling Dispersion Loaded with Saquinavir Mesylate to Improve Its Bioavailability: Preparation, Optimization, in vitro and in vivo Evaluation

Hosny KM • International Journal of Nanomedicine (2020)

Khaled M Hosny1,2 1Department of Pharmaceutics, Faculty of Pharmacy, King Abdulaziz University, Jeddah, Saudi Arabia; 2Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, Beni-Suef University, Beni-Suef, EgyptCorrespon...

DOAJ Open Access (DOAJ)