Reset
Showing 12 of 12 academic articles

Hybrid Coatings Based on Polyvinylpyrrolidone/Polyethylene Glycol Enriched with Collagen and Hydroxyapatite: Incubation Studies and Evaluation of Mechanical and Physiochemical Properties

Dagmara Słota, Josef Jampilek, Agnieszka Sobczak-Kupiec • Journal of Functional Biomaterials (2024)

Coating materials offers an intriguing solution for imparting inert implants with additional bioactive characteristics without changing underlying parameters such as mechanical strength. Metallic implants like endoprostheses or polymeric im...

DOAJ Open Access (DOAJ) DOI: 10.3390/jfb15030062

Compression and Tensile Testing of L-PBF Ti-6Al-4V Lattice Structures with Biomimetic Porosities and Strut Geometries for Orthopedic Implants

Dimitri P. Papazoglou, Amy T. Neidhard-Doll, Margaret F. Pinnell, Dathan S. Erdahl et al. • Metals (2024)

In an effort to contribute to the ongoing development of ASTM standards for additively manufactured metal lattice specimens, particularly within the field of medicine, the compressive and tensile mechanical properties of biomimetic lattice ...

DOAJ Open Access (DOAJ) DOI: 10.3390/met14020232

Effects of Density and Moisture Variation on Dynamic Deformation Properties of Compacted Lateritic Soil

Weizheng Liu, Shuai Qu, Zhihong Nie, Junhui Zhang • Advances in Materials Science and Engineering (2016)

A series of repeated load triaxial tests were conducted in this study to investigate the influences of compaction density and postcompaction moisture variation on the dynamic elastic modulus (Ed) and plastic permanent strain (PPS) of compac...

DOAJ Open Access (DOAJ) DOI: 10.1155/2016/5951832

Experimental study on the impact of sulfate attack on the performance of shaft lining concrete under sustained compressive load

Guo-qiang Xu, Wei Zhang, Si Chen, Zhen-kai Zhu et al. • Case Studies in Construction Materials (2024)

To investigate the impact of sulfate corrosion on the performance of shaft lining concrete under sustained compressive loads, this study immersed samples in a 10 % sodium sulfate solution after subjecting to sustained compressive loads of 0...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.cscm.2024.e03657

Assessing the natural durability of different tropical timbers in soil-bed tests

Serafín Colín-Urieta, Artemio Carrillo-Parra, José Guadalupe Rutiaga-Quiñones, Pablo López-Albarran et al. • Maderas: Ciencia y Tecnología (2019)

Ground contact speeds up timber decay because of the large number of microorganisms in soil. This study, we assessed the natural durability of seven tropical species using the European standard EN 807 (2001). We embedded samples of Dalbergi...

DOAJ Open Access (DOAJ)

A study on the flexural behaviour of lightweight concrete beams reinforced with pumice, silica fume and carbon fibers

Guledagudd Chaitali B., Praveen Kannam, Kulkarni Vinayak N. • Journal of the Mechanical Behavior of Materials (2026)

Lightweight aggregate concrete (LWAC) incorporating pumice aggregates offers a sustainable alternative to conventional concrete, enabling a reduced self-weight while maintaining adequate strength and stiffness for structural applications. T...

DOAJ Open Access (DOAJ) DOI: 10.1515/jmbm-2025-0113

Elastic modulus of β-Ga2O3 nanowires measured by resonance and three-point bending techniques

Annamarija Trausa, Sven Oras, Sergei Vlassov, Mikk Antsov et al. • Beilstein Journal of Nanotechnology (2024)

Due to the recent interest in ultrawide bandgap β-Ga2O3 thin films and nanostructures for various electronics and UV device applications, it is important to understand the mechanical properties of Ga2O3 nanowires (NWs). In this work, we inv...

DOAJ Open Access (DOAJ) DOI: 10.3762/bjnano.15.58

Potential of machine learning approaches for predicting mechanical properties of spruce wood in the transverse direction

Shuoye Chen, Rei Shiina, Kazushi Nakai, Tatsuya Awano et al. • Journal of Wood Science (2023)

Abstract To predict the mechanical properties of wood in the transverse direction, this study used machine learning to extract the anatomical features of wood from cross-sectional stereograms. Specimens with different orientations of the ra...

DOAJ Open Access (DOAJ) DOI: 10.1186/s10086-023-02096-z

Determining the Optimum Layer Combination for Cross-Laminated Timber Panels According to Timber Strength Classes Using Artificial Neural Networks

Engin Derya Gezer, Abdullah Uğur Birinci, Aydın Demir, Hasan Öztürk et al. • BioResources (2024)

The primary aim of this work was to determine the effects of production parameters, such as wood species and timber strength classes, on some mechanical properties of cross-laminated timber (CLT) panels using artificial neural network (ANN)...

DOAJ Open Access (DOAJ)

Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase

Sagar Chokshi, Piyush Gohil, Vijay Parmar, Vijaykumar Chaudhary • Mechanics of Advanced Composite Structures (2025)

Machine Learning has become prevalent nowadays for predicting data on the mechanical properties of various materials and is widely used in various polymeric applications. In the present study, Artificial Neural Network (ANN), a computationa...

DOAJ Open Access (DOAJ) DOI: 10.22075/macs.2024.33874.1664