Reset
Showing 20 of 20 academic articles

Hybrid Coatings Based on Polyvinylpyrrolidone/Polyethylene Glycol Enriched with Collagen and Hydroxyapatite: Incubation Studies and Evaluation of Mechanical and Physiochemical Properties

Dagmara Słota, Josef Jampilek, Agnieszka Sobczak-Kupiec • Journal of Functional Biomaterials (2024)

Coating materials offers an intriguing solution for imparting inert implants with additional bioactive characteristics without changing underlying parameters such as mechanical strength. Metallic implants like endoprostheses or polymeric im...

DOAJ Open Access (DOAJ) DOI: 10.3390/jfb15030062

Development of Hemp-Containing Denim Fabrics: A Comparative Study of Mechanical and Dimensional Properties

Gamze Okyay Sezer • Journal of Natural Fibers (2026)

Increasing environmental impact of conventional cotton denim production and concerns regarding cotton cultivation under changing climatic conditions have intensified the search for more sustainable raw material alternatives. Hemp is a promi...

DOAJ Open Access (DOAJ) DOI: 10.1080/15440478.2026.2734659

Compression and Tensile Testing of L-PBF Ti-6Al-4V Lattice Structures with Biomimetic Porosities and Strut Geometries for Orthopedic Implants

Dimitri P. Papazoglou, Amy T. Neidhard-Doll, Margaret F. Pinnell, Dathan S. Erdahl et al. • Metals (2024)

In an effort to contribute to the ongoing development of ASTM standards for additively manufactured metal lattice specimens, particularly within the field of medicine, the compressive and tensile mechanical properties of biomimetic lattice ...

DOAJ Open Access (DOAJ) DOI: 10.3390/met14020232

Study of a constrained finite element elbow prosthesis: the influence of the implant placement

Lorenzo Nalbone, Francesco Monac, Luca Nalbone, Tommaso Ingrassia et al. • Journal of Orthopaedics and Traumatology (2023)

Abstract Background The functional results of total elbow arthroplasty (TEA) are controversial and the medium- to long-term revision rates are relatively high. The aim of the present study was to analyze the stresses of TEA in its classic c...

DOAJ Open Access (DOAJ) DOI: 10.1186/s10195-023-00690-x

Effects of Density and Moisture Variation on Dynamic Deformation Properties of Compacted Lateritic Soil

Weizheng Liu, Shuai Qu, Zhihong Nie, Junhui Zhang • Advances in Materials Science and Engineering (2016)

A series of repeated load triaxial tests were conducted in this study to investigate the influences of compaction density and postcompaction moisture variation on the dynamic elastic modulus (Ed) and plastic permanent strain (PPS) of compac...

DOAJ Open Access (DOAJ) DOI: 10.1155/2016/5951832

Developing a New Biophysical Tool to Combine Magneto-Optical Tweezers with Super-Resolution Fluorescence Microscopy

Zhaokun Zhou, Helen Miller, Adam J.M. Wollman, Mark C. Leake • Photonics (2015)

We present a novel experimental setup in which magnetic and optical tweezers are combined for torque and force transduction onto single filamentous molecules in a transverse configuration to allow simultaneous mechanical measurement and man...

DOAJ Open Access (DOAJ) DOI: 10.3390/photonics2030758

Experimental study on the impact of sulfate attack on the performance of shaft lining concrete under sustained compressive load

Guo-qiang Xu, Wei Zhang, Si Chen, Zhen-kai Zhu et al. • Case Studies in Construction Materials (2024)

To investigate the impact of sulfate corrosion on the performance of shaft lining concrete under sustained compressive loads, this study immersed samples in a 10 % sodium sulfate solution after subjecting to sustained compressive loads of 0...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.cscm.2024.e03657

A First-principles analysis of Structural, Electronic, Elastic, and vacant properties of BCC, FCC and HCP tungsten at different electronic temperatures

X.B. Ye, B.C. Pan • Nuclear Materials and Energy (2023)

Since tungsten (W) was considered as the most promising plasma facing materials (PFMs) in fusion reactors, there has been extensive research on the physical performance of W-PFMs. It is found that under the extreme conditions in a fusion re...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.nme.2023.101447

A study on the flexural behaviour of lightweight concrete beams reinforced with pumice, silica fume and carbon fibers

Guledagudd Chaitali B., Praveen Kannam, Kulkarni Vinayak N. • Journal of the Mechanical Behavior of Materials (2026)

Lightweight aggregate concrete (LWAC) incorporating pumice aggregates offers a sustainable alternative to conventional concrete, enabling a reduced self-weight while maintaining adequate strength and stiffness for structural applications. T...

DOAJ Open Access (DOAJ) DOI: 10.1515/jmbm-2025-0113

Evolution of prehension ability in an anthropomorphic neurorobotic arm

Gianluca Massera, Gianluca Massera, Angelo Cangelosi, Stefano Nolfi • Frontiers in Neurorobotics (2007)

In this paper, we show how a simulated anthropomorphic robotic arm controlled by an artificial neural network can develop effective reaching and grasping behaviour through a trial and error process in which the free parameters encode the co...

DOAJ Open Access (DOAJ) DOI: 10.3389/neuro.12.004.2007

Exploring Ru 4d oxide Ba2XRuO6 (X = Y, Lu, Sc) for spintronics: pressure-dependent first-principles study

Razia Abdul Majid Qureshi, Altaf Ur Rahman, Altaf Ur Rahman, Muhammad Sajjad et al. • Frontiers in Chemistry (2026)

Recent advances in the precise control of electromagnetic and transport properties, and the miniaturization of electronic devices, have introduced new prospects in the development of practical quantum computing. Double perovskites have gain...

DOAJ Open Access (DOAJ) DOI: 10.3389/fchem.2026.1814481

Elastic modulus of β-Ga2O3 nanowires measured by resonance and three-point bending techniques

Annamarija Trausa, Sven Oras, Sergei Vlassov, Mikk Antsov et al. • Beilstein Journal of Nanotechnology (2024)

Due to the recent interest in ultrawide bandgap β-Ga2O3 thin films and nanostructures for various electronics and UV device applications, it is important to understand the mechanical properties of Ga2O3 nanowires (NWs). In this work, we inv...

DOAJ Open Access (DOAJ) DOI: 10.3762/bjnano.15.58

Potential of machine learning approaches for predicting mechanical properties of spruce wood in the transverse direction

Shuoye Chen, Rei Shiina, Kazushi Nakai, Tatsuya Awano et al. • Journal of Wood Science (2023)

Abstract To predict the mechanical properties of wood in the transverse direction, this study used machine learning to extract the anatomical features of wood from cross-sectional stereograms. Specimens with different orientations of the ra...

DOAJ Open Access (DOAJ) DOI: 10.1186/s10086-023-02096-z

Determining the Optimum Layer Combination for Cross-Laminated Timber Panels According to Timber Strength Classes Using Artificial Neural Networks

Engin Derya Gezer, Abdullah Uğur Birinci, Aydın Demir, Hasan Öztürk et al. • BioResources (2024)

The primary aim of this work was to determine the effects of production parameters, such as wood species and timber strength classes, on some mechanical properties of cross-laminated timber (CLT) panels using artificial neural network (ANN)...

DOAJ Open Access (DOAJ)

Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase

Sagar Chokshi, Piyush Gohil, Vijay Parmar, Vijaykumar Chaudhary • Mechanics of Advanced Composite Structures (2025)

Machine Learning has become prevalent nowadays for predicting data on the mechanical properties of various materials and is widely used in various polymeric applications. In the present study, Artificial Neural Network (ANN), a computationa...

DOAJ Open Access (DOAJ) DOI: 10.22075/macs.2024.33874.1664

Machine learning in pain research

Jörn Lötsch, Alfred Ultsch • Pain (2017)

1. Introduction Pain and pain chronification are incompletely understood and unresolved medical problems that continue to have a high prevalence.14 It has been accepted that pain is a complex phenomenon.2,32,72 Contemporary methods of compu...

OPENALEX cc-by-nc-nd DOI: https://doi.org/10.1097/j.pain.0000000000001118 PMC: 5895117

Neural Networks and Artificial’s Intelligence’s Algorithms in the Tasks of Diagnostics Foreign Bodies

Олександр Саленко, Віктор Черняк, Вадим Орел, Богдан Саленко • Mechanics and Advanced Technologies (2026)

The paper considers a device in which information about the presence of a foreign body a fragment in a wound is obtained using a special compact sensor: a mechanical elastic flexible rod, which is placed in a protective soft tube and connec...

DOAJ Open Access (DOAJ) DOI: 10.20535/2521-1943.2026.10.1(108).344614