📖
The cooling efficiency of s‐CO₂ microchannel heat sink compared with a water‐based design
Navid Dehdashti Akhavan, Foued Abroug, Lionel Arnaud, Kamel Hooman

The cooling efficiency of s‐CO₂ microchannel heat sink compared with a water‐based design

Science & Mathematics Published 2022 Verification Pending

Overview & Synopsis

High-pressure drops characteristic of microchannel heat sinks (MCHS) is an issue that needs to be addressed to reduce the size of heat-removing devices in compact electronic devices. Supercritical carbon dioxide (s-CO2) is a suitable candidate being proposed as an alternative coolant to enhance the cooling of the microchannel heat sink (MCHS), with high heat flux, due to its favorable thermophysical properties near its critical point. In this study, numerical simulations are conducted to evaluate the thermal and hydraulic performance of a channel for a designed heat sink with s-CO2 (at constant P=8MPa) and compare it with conventional liquid coolant (water). The effect of coolants mass flow rate (Q), channel aspect ratio (AR), and inlet temperatures on the thermal and hydraulic performance of one channel is studied by varying Q from 0.004 to 0.03 kg/s and AR from 0.33 to 10. The results show that, for the same aspect ratio, same geometry, and constant heat flux, s-CO2 offers a higher overall heat transfer coefficient (32%) with a lower friction factor (pumping power) compared with the water at the same inlet temperature (T=32°C)The results of pumping power comparison between two coolants reveal that for CO2 in supercritical conditions (P=8MPa, T=32°C) the consumed power varies by change of the aspect ratio, which is 1.85 times lower than water for AR = 0.33 and is 3.6 times higher for AR=10. However, in the subcooled state, the reverse effect of the aspect ratio is seen.

Indexed from repository: HAL Open Science (hal.science)
Loading document from verified source...
Keyboard Shortcuts: ← / → for pages • + / - for zoom • 0 to fit width Powered by Mozilla PDF.js v3.11

Document Information

Document Title The cooling efficiency of s‐CO₂ microchannel heat sink compared with a water‐based design
Author / Organization Navid Dehdashti Akhavan, Foued Abroug, Lionel Arnaud, Kamel Hooman
Subject & Discipline Multidisciplinary Academic Open Research
Categories Science & Mathematics
Publication Year 2022
License / Rights Open Access / Creative Commons
Resource Verification Listed PDF (Verification Pending)
Original Host Website HAL Open Science (hal.science)
File Format application/pdf (Portable Document Format)
Language EN
Catalog ID DOC-135552
Original Source Link Visit Source Page on hal.science »