Theoretical and experimental determination of effective diffusion and thermodiffusion coefficients in porous media
Overview & Synopsis
The impact of thermal gradients on material transfer in porous media is still poorly understood, mainly due to the complexity of coupled phenomena such as thermodiffusion and the Soret effect. The aim of this thesis is to study and understand the influence that a thermal gradient can have on the flow of a mixture. The main objective is to determine the effective coefficients modeling heat and matter transfer in porous media, and in particular the effective thermodiffusion coefficient. Using the volume-averaged scaling technique, we have developed a macroscopic dispersion model including thermodiffusion. In particular, we studied the influence of Peclet number and thermal conductivity on thermodiffusion. The results show that for low Péclet numbers, the effective Soret number in porous media is the same as in free media, and does not depend on the thermal conductivity ratio (solid/liquid). Conversely, under convective conditions, the effective Soret number decreases. In this case, a change in the conductivity ratio will change the effective thermodiffusion coefficient. Theoretical results have also shown that, during pure diffusion, even if the effective thermal conductivity depends on the connectivity of the solid phase, the effective thermodiffusion coefficient is always constant and independent of the connectivity of the solid phase. The macroscopic model obtained by this method is validated by comparison with direct numerical simulations at the pore scale. Good agreement is observed between theoretical predictions from the macroscopic scale study and numerical simulations at the pore scale. This demonstrates the validity of the proposed theoretical model. To verify and consolidate these results, an experimental setup was set up to measure transfer coefficients in free and porous media. In this section, the new experimental results are obtained using a two-bulb apparatus. Diffusion and thermodiffusion of helium-nitrogen and helium-carbon dioxide binary systems, through cylindrical samples filled with beads of different diameters and thermal properties, are measured at atmospheric pressure. The porosity of each medium was determined by constructing a 3D tomographic image of the sample. Concentrations are determined by continuously analyzing the composition of the gas mixture in the ampoules using a catharometer. Diffusion and thermodiffusion coefficients are determined by comparing temporal readings of concentrations with an analytical solution modeling material transfer between two ampoules. The results are in agreement with the theoretical ones. This confirms the influence of porosity on diffusion and thermodiffusion mechanisms.
hal.science)
← / → for pages • + / - for zoom • 0 to fit width
Powered by Mozilla PDF.js v3.11
Document Information
| Document Title | Theoretical and experimental determination of effective diffusion and thermodiffusion coefficients in porous media |
|---|---|
| Author / Organization | Hossein Davarzani |
| Subject & Discipline | Multidisciplinary Academic Open Research |
| Categories | Science & Mathematics |
| Publication Year | 2010 |
| License / Rights | Open Access / Creative Commons |
| Resource Verification | Listed PDF (Verification Pending) |
| Original Host Website |
HAL Open Science
(hal.science)
|
| File Format | application/pdf (Portable Document Format) |
| Language | EN |
| Catalog ID | DOC-137205 |
| Original Source Link | Visit Source Page on hal.science » |