Low-Profile Highly Directive 2D-Beam-Steering Antenna in Ka-band with 3D-printed All-dielectric Sub-wavelength Deflectors
Overview & Synopsis
An elegant combination of a large-aperture planar radiating panel and a 2D-scanning part, implemented through a pair of 3D-printed sub-wavelength deflectors, is presented in this paper to demonstrate a low-profile 2D-scanning antenna system in Ka-band. A 28-cm-diameter prototype was manufactured, with in particular the dielectric deflectors fabricated by 3D printing of a high-permittivity and low-loss composite. The total height of the antenna system is only 4 cm, corresponding to 3.8 wavelengths at 29 GHz. The antenna system demonstrates a steering capacity up to 66° in elevation and 360° in azimuth, with a measured realizedgain of 33 dBi at 0° and 27.4 dBi at 66° scan angle at 29 GHz. The 3dB-bandwidth is 6.5%, covering the 27.75-29.6 GHz range. The measured results validate the simulated steering performance of the system with good agreement and confirm the advantage of using this concept for achieving low-cost, low-profile, lightweight, and simple-configuration 2D-beam-scanning antenna.
hal.science)
← / → for pages • + / - for zoom • 0 to fit width
Powered by Mozilla PDF.js v3.11
Document Information
| Document Title | Low-Profile Highly Directive 2D-Beam-Steering Antenna in Ka-band with 3D-printed All-dielectric Sub-wavelength Deflectors |
|---|---|
| Author / Organization | Thi Quynh Van Hoang, Matthieu Bertrand, Erika Vandelle, Brigitte Loiseaux |
| Subject & Discipline | Multidisciplinary Academic Open Research |
| Categories | Science & Mathematics |
| Publication Year | 2022 |
| License / Rights | Open Access / Creative Commons |
| Resource Verification | Listed PDF (Verification Pending) |
| Original Host Website |
HAL Open Science
(hal.science)
|
| File Format | application/pdf (Portable Document Format) |
| Language | EN |
| Catalog ID | DOC-153460 |
| Original Source Link | Visit Source Page on hal.science » |