📖
Effects of montmorillonite, sepiolite, and halloysite clays on the morphology and properties of polycaprolactone bionanocomposites
Amel Kassa, Aida Benhamida, Mustapha Kaci, Stéphane Bruzaud

Effects of montmorillonite, sepiolite, and halloysite clays on the morphology and properties of polycaprolactone bionanocomposites

Science & Mathematics Published 2019 Verification Pending

Overview & Synopsis

The article reports some experimental data on the effects of three types of clay: organo-modified montmorillonite (cloisite 30B (C30B)), sepiolite (SP9), and halloysite nanotubes (HNT) on the morphology and physicomechanical properties of polycaprolactone (PCL)/clays bionanocomposites prepared by melt compounding. The clays were incorporated separately into the PCL matrix at a loading rate of 5.00 wt%, which corresponds to 2.91 ± 0.53, 2.42 ± 0.02, and 2.68 ± 0.13 vol% for C30B, SP9, and HNT, respectively. Scanning electron microscopy analysis showed good dispersion of both C30B and SP9 in the polymer matrix, while the presence of a few HNT aggregates was observed on the fracture surface of the PCL bionanocomposite. Furthermore, the HNT aggregates were randomly dispersed. The results indicated an enhancement of the rheological and tensile properties of the PCL bionanocomposite samples filled with C30B and SP9 compared to those containing HNT. Indeed, it was shown an increase in Young’s modulus of PCL from 450 ± 16 MPa to 563 ± 42 MPa, 645 ± 68 MPa, and 502 ± 66 MPa for PCL bionanocomposites loaded with C30B, SP9, and HNT, respectively. On the other hand, the thermal stability of the whole PCL bionanocomposite samples was reduced being, however, more pronounced for those containing HNT. The decomposition temperature recorded at 5.00 wt% loss ( T 5% ) indicated 384.7 ± 0.9 for neat PCL, while the PCL bionanocomposites filled with C30B, SP9, and HNT exhibited the values of 357.3 ± 0.5, 353.2 ± 0.9, and 368.4 ± 0.4, respectively.

Indexed from repository: HAL Open Science (hal.science)
Loading document from verified source...
Keyboard Shortcuts: ← / → for pages • + / - for zoom • 0 to fit width Powered by Mozilla PDF.js v3.11

Document Information

Document Title Effects of montmorillonite, sepiolite, and halloysite clays on the morphology and properties of polycaprolactone bionanocomposites
Author / Organization Amel Kassa, Aida Benhamida, Mustapha Kaci, Stéphane Bruzaud
Subject & Discipline Multidisciplinary Academic Open Research
Categories Science & Mathematics
Publication Year 2019
License / Rights Open Access / Creative Commons
Resource Verification Listed PDF (Verification Pending)
Original Host Website HAL Open Science (hal.science)
File Format application/pdf (Portable Document Format)
Language EN
Catalog ID DOC-175871
Original Source Link Visit Source Page on hal.science »