📖
Efficient Gas and Water Vapor Barrier Properties of Thin Poly(lactic acid) Packaging Films: Functionalization with Moisture Resistant Nafion and Clay Multilayers
Federico Carosio, Samuele Colonna, Alberto Fina, Gaulthier Rydzek, Joseph Hemmerle, Loïc Jierry, Pierre Schaaf, Fouzia Boulmedais

Efficient Gas and Water Vapor Barrier Properties of Thin Poly(lactic acid) Packaging Films: Functionalization with Moisture Resistant Nafion and Clay Multilayers

Science & Mathematics Published 2014 Verification Pending

Overview & Synopsis

Poly(lactic acid) (PLA) represents one of the most promising and attractive biobased polymer for the industrial development of environmentally sustainable packaging. However, oxygen and water barrier properties of PLA based films cannot compete with those of commercially available composite multi-layers. To fill this gap, we used the layer-by-layer deposition technique on commercially used PLA thin films (30 μm thick) in order to increase their barrier properties to oxygen and water vapor. Nanometric films were grown by alternating branched poly(ethylene imine) (BPEI), hydrophobic fluorinated polymer (Nafion), and montmorillonite clay (MMT) layers with the aim of obtaining low gas permeability in both dry and moist conditions as well as low water vapor permeability. Two different kinds of architectures were designed and successfully prepared, based on a 4 layer repeating unit (BPEI/MMT/BPEI/Nafion), represented here as quadlayer (QL), and on a 6 layer repeating-unit ((BPEI/Nafion) 2 /BPEI/MMT), hexalayer (HL). Reduction in oxygen and water permeabilities is observed for films based on both types of repeat units. The reduction of the permeabilities increases with the number of quad and hexalayers achieving reductions in terms of oxygen permeability in both dry and humid conditions up to 98% and 97% respectively for 10 HL and QL. Furthermore, a reduction of 78% of water vapor transmission rate through the functionalized film was obtained for these films. As far as oxygen permeability is concerned, HL films are more efficient than QL films for smaller numbers of deposition units. These properties are shown to result from the complementarity between the presence of BPEI/Nafion and MMT layers.

Indexed from repository: HAL Open Science (hal.science)
Loading document from verified source...
Keyboard Shortcuts: ← / → for pages • + / - for zoom • 0 to fit width Powered by Mozilla PDF.js v3.11

Document Information

Document Title Efficient Gas and Water Vapor Barrier Properties of Thin Poly(lactic acid) Packaging Films: Functionalization with Moisture Resistant Nafion and Clay Multilayers
Author / Organization Federico Carosio, Samuele Colonna, Alberto Fina, Gaulthier Rydzek, Joseph Hemmerle, Loïc Jierry, Pierre Schaaf, Fouzia Boulmedais
Subject & Discipline Multidisciplinary Academic Open Research
Categories Science & Mathematics
Publication Year 2014
License / Rights Open Access / Creative Commons
Resource Verification Listed PDF (Verification Pending)
Original Host Website HAL Open Science (hal.science)
File Format application/pdf (Portable Document Format)
Language EN
Catalog ID DOC-187246
Original Source Link Visit Source Page on hal.science »