Experimental analysis of the thermal unbalance effect of a flexible rotor supported by a flexure pivot tilting pad bearing

Overview & Synopsis

The Morton effect is a thermally induced increase of synchronous vibrations amplitudes of rotors. The shearing of the fluid film in a journal bearing produces an asymmetric heating of the rotor which causes its thermal bending and increases the unbalance. The vector of synchronous vibrations describes a spiral with slowly increasing amplitude and phase change. The thermal bending is also enlightened by a hysteresis effect of the synchronous vibrations during start-up and coast-down. The purpose of this study is to highlight experimentally the signature of Morton effect in a flexible rotor supported by a flexure pivot tilting pad journal bearing. A dedicated test rig has been built. It consists of a flexible rotor guided at one end by a ball bearing and at the other end by a flexure pivot tilting pad bearing. The tests consist of controlled start-ups to a speed close to the critical speed of the first rotor flexible mode, followed by controlled coast-downs. They show a hysteresis of the amplitudes and phases of the synchronous vibrations. Other tests performed at constant speeds show amplitude and phase variations corresponding to spiral vibrations. The results are explained by the non-uniform distribution of the rotor temperature.