📖
Effects of thermal cycling and mechanical characterization of an asteroid regolith simulant material
Sébastien Cohoner

Effects of thermal cycling and mechanical characterization of an asteroid regolith simulant material

Author / Organization:
Science & Mathematics Published 2023 Verification Pending

Overview & Synopsis

The OSIRIS-REx space mission from the NASA recently returned asteroid regolith samples from the carbonaceous asteroid Bennu to Earth. Micrometeorite bombardment and thermal cracking are the two main processes responsible for the formation of regolith on the surface of asteroids. The materials that constitute most of the near-Earth asteroids are believed to be very weak, common in space but almost nonexistent on earth.In this study we focus on the mechanical characterization and the study of fracturing by thermal cycling of this material.An analogue to carbonaceous meteorites with a CM-like composition, following the preliminary compositional results for Bennu and Ryugu developed in collaboration with the University of Central Florida (UCF) and Deep Space Industries (DSI) and is now produced by UCF’s Exolith Lab will be used to investigate this phenomena. Water and sodium metasilicate were added to the simulant to act like a binder and form blocks as well as glass beads of 400−600µm to simulate chondrite inclusions (chondrules, CAIs). Then a wire saw has been used to machine the samples for both mechanical tests and for thermal cycling.Tensile and compression tests were performed on different samples to in order to determine the modulus of elasticity of 1GPa and the tensile strength of 250kPa.For the thermal cycling, we chose to make them have a cylindrical shape to have a temperature propagation as homogeneous as possible. The size of the sample has been chosen to be big enough to be considered as a representative volume element and as small as possible to reduce the time of the thermal cycles (11mm of diameter and 20mm height). We chose the temperatures to have a ∆T=200K. To do so, liquid nitrogen has been chosen to cool down the sample at 77K while the ambient temperature will warm it up. X-ray tomography scans have been performed at the initial state and after different amount of cycles in order to follow the formation and the propagation of cracks inside the material. The images were then processed using SPAM, which is a numerical code on Python developed by the 3SR laboratory in Grenoble in France. The results show the appearance of cracks from the first 70 cycles. These cracks occur in areas close to the sample surface and are localized around inclusions. During the first 140 cycles, there are detachments of inclusion on the surface as well as the propagation of certain large voids which can go as far as opening on the surface. After 270 cycles, the propagation of the cracks significantly damaged the material, making it weaker, which led to the rupture of the lower part of our sample.

Indexed from repository: HAL Open Science (hal.science)
Loading document from verified source...
Keyboard Shortcuts: ← / → for pages • + / - for zoom • 0 to fit width Powered by Mozilla PDF.js v3.11

Document Information

Document Title Effects of thermal cycling and mechanical characterization of an asteroid regolith simulant material
Author / Organization Sébastien Cohoner
Subject & Discipline Multidisciplinary Academic Open Research
Categories Science & Mathematics
Publication Year 2023
License / Rights Open Access / Creative Commons
Resource Verification Listed PDF (Verification Pending)
Original Host Website HAL Open Science (hal.science)
File Format application/pdf (Portable Document Format)
Language EN
Catalog ID DOC-216035
Original Source Link Visit Source Page on hal.science »