📖
Thermodynamic modelling and simulation of hydrothermal sintering mechanism: understanding densification and porosity characteristic evolutions
S. Bordère, Lucas Villatte, Marie Anne Dourges, Graziella Goglio, Catherine Elissalde

Thermodynamic modelling and simulation of hydrothermal sintering mechanism: understanding densification and porosity characteristic evolutions

Science & Mathematics Published 2025 Verification Pending

Overview & Synopsis

Hydrothermal sintering of silica powders has never exceeded 75% densification, with reference to the literature. The study of phenomena likely to occur when densification stalls is addressed combining experimental and modelling approaches. Several samples were obtained by performing interrupted tests during a densification cycle of a submicron silica powder carried out at 300° C for 60 min under a uniaxial pressure of 350 MPa. Despite the stagnation of densification, an evolution of pore size distribution at constant pore volume was evidenced using Mercury Intrusion Porosimetry (MIP). The thermodynamic modelling of the pore space aimed to establish a diagram determining the degree of liquid saturation of the porosity at 300°C as a function of the relative density of the powder and the mass fraction of water initially mixed with the powder. Moreover, a numerical modelling of the mechano-chemical coupling of solute transfer at the solid/liquid interface, was specifically developed for this study. The thermodynamic diagram showed that the initial hydration of 7-10 wt.% of the silica powder ensures liquid water in the porosity throughout the thermal cycle, with significant wetting of the pore surface at 300 • C and 75% relative density. Simulation of the pressure-induced dissolution and precipitation processes in a 2D porous medium fully saturated with liquid and subjected to uniaxial pressure showed a local redistribution of matter along the pore surface in relation to the anisotropic stress field. Such non-densifying mechanism could be identified in light of these modelling results.

Indexed from repository: HAL Open Science (hal.science)
Loading document from verified source...
Keyboard Shortcuts: ← / → for pages • + / - for zoom • 0 to fit width Powered by Mozilla PDF.js v3.11

Document Information

Document Title Thermodynamic modelling and simulation of hydrothermal sintering mechanism: understanding densification and porosity characteristic evolutions
Author / Organization S. Bordère, Lucas Villatte, Marie Anne Dourges, Graziella Goglio, Catherine Elissalde
Subject & Discipline Multidisciplinary Academic Open Research
Categories Science & Mathematics
Publication Year 2025
License / Rights Open Access / Creative Commons
Resource Verification Listed PDF (Verification Pending)
Original Host Website HAL Open Science (hal.science)
File Format application/pdf (Portable Document Format)
Language EN
Catalog ID DOC-256226
Original Source Link Visit Source Page on hal.science »