Investigations of nano-crystalline Sr0.5Ba0.5Nb2O6 and bulk ceramics synthesized by a polymerization method using PEG400
Overview & Synopsis
Nano-crystalline Sr0.5Ba0.5Nb2O6 was synthesized by a one-pot method using PEG400 and citric acid. Calcination of the (Sr,Ba,Nb)-gel at 600 °C leads to Sr0.5Ba0.5Nb2O6 with a crystallite size of 24(2) nm and a specific surface area of 38.5(10) m2 g-1. Sintering up to 1325 °C leads to ceramics with globular or irregular-shaped grains and average grain sizes between 1.3 and 2.4 µm, whereas higher temperatures lead to a rod-like microstructure. The indirect allowed optical band gap varies between 3.70(5) and 3.29(5) eV. Dielectric measurements show a diffuse phase transition and weak relaxor properties. The maximum of the permittivity occurs between 116 and 147 °C. The frequency dependence of the impedance can be well described by one or two RC-circuits depending on sintering temperature. The 2 melting temperature is determined as 1506(7) °C with dH f = 140(20) kJ mol-1. The average linear thermal expansion coefficient is found to be 10.5(5)*10-6 K-1 .
hal.science)
← / → for pages • + / - for zoom • 0 to fit width
Powered by Mozilla PDF.js v3.11
Document Information
| Document Title | Investigations of nano-crystalline Sr0.5Ba0.5Nb2O6 and bulk ceramics synthesized by a polymerization method using PEG400 |
|---|---|
| Author / Organization | Roberto Köferstein, Florian Oehler, Stefan G Ebbinghaus |
| Subject & Discipline | Multidisciplinary Academic Open Research |
| Categories | Science & Mathematics |
| Publication Year | 2019 |
| License / Rights | Open Access / Creative Commons |
| Resource Verification | Listed PDF (Verification Pending) |
| Original Host Website |
HAL Open Science
(hal.science)
|
| File Format | application/pdf (Portable Document Format) |
| Language | EN |
| Catalog ID | DOC-9805 |
| Original Source Link | Visit Source Page on hal.science » |