Home »
Academic Articles & Research Papers
Showing 20 of 36 academic articles
Mandlenkosi G.R. Mahlobo, Lethu Chikosha, Peter A. Olubambi • Journal of Materials Research and Technology
(2022)
Great efforts have been made in fabricating Ti–6Al–4V alloys that can be used in the biomedical implants industry. The increasing interest in using fabricated Ti–6Al–4V alloys in industrial applications is mainly due to the properties of al...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2022.04.004
Ali Mahdi Farhan, Hanaa Kadtem Egzar, Hawraa Mahdi Alabidi • Acta Chimica Slovenica
(2024)
A new azo compound [2-((4-hydroxy-3-(E)-(2-hydroxy-5-nitrophenyl)diazenyl)benzaldeyde and the azo schiff derivative [2-((4-hydroxy-3-((E)-(2-hydroxy-5-nitrophenyl)diazenyl)benzylidene)amino)-4-nitrophenol (Azo-S) has been synthesized. 13C-N...
DOAJ
Open Access (DOAJ)
DOI: 10.17344/acsi.2023.8489
Yangzhong Jing, Shuliang Wang, Yuyao Chen, Mingyu Bao et al. • International Journal of Electrochemical Science
(2018)
Corrosion product films were formed on P110 casing steels by high-temperature and high-pressure autoclave in a CO2 environment induced by tensile stress. The effects of applied tensile stress on the protection characteristics and electroche...
DOAJ
Open Access (DOAJ)
DOI: 10.20964/2018.08.21
Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报
(2021)
Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...
DOAJ
Open Access (DOAJ)
DOI: 10.13374/j.issn2095-9389.2020.09.29.001
Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版
(2017)
Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...
DOAJ
Open Access (DOAJ)
DOI: 10.3969/J.ISSN.1000-5137.2017.06.006
J.C. Scully • Corrosion Science
(1987)
OPENALEX
DOI: https://doi.org/10.1016/0010-938x(87)90083-7
William F. Smith • Journal of International Crisis and Risk Communication Research
(1986)
This book attempts to provide basic knowledge about the structure, properties, and processing of engineering materials and their applications. The first chapter gives an introduction to materials science and engineering and briefly describe...
OPENALEX
Open Access
Inés Pérez-Gonzalo, Florentino Alvarez-Antolin, Alejandro González-Pociño, Luis Borja Peral-Martinez • Journal of Manufacturing and Materials Processing
(2025)
This study investigates the mechanical, tribological, and electrochemical behaviour of a novel precipitation-hardenable martensitic alloy produced by selective laser melting (SLM). The alloy was specifically engineered with an optimised com...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/jmmp9080261
Roman Gabor, Ladislav Cvrček, Martina Doubková, Václav Nehasil et al. • Materials & Design
(2022)
This study is focused on the preparation of new hybrid layers intended for surface modification of Ti-6Al-4V alloys for potential orthopaedic and dental applications. Combination of the technology of physical vapour deposition (PVD) and sub...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2022.110811
A. Mark Pollard, Don R. Brothwell • University of Groningen research database (University of Groningen / Centre for Information Technology)
(2001)
List of Contributors. Foreword: Martin Aitken FRS. Acknowledgements. Introduction: Archaeological Science: A current Perspective (D. Brothwell & A. Pollard). DATING.Overview -- Dating in Archaeology: Past, Present and Future (R. Hedges). Qu...
OPENALEX
Miaomiao Wang, Xing Ming, Qiao Wang, Hongyao Ding et al. • Journal of Materials Research and Technology
(2024)
Magnesium potassium phosphate cement-based (MKPC) coating is regarded as an attractive green coating that improves the corrosion resistance of metals. Unfortunately, practical use remains challenging owing to the rapid solidification and ha...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2024.11.220
Linlin Lu, Lecai Liang • Energy Science & Engineering
(2021)
Abstract Buried oil and gas pipelines may face the threat of geological disasters such as landslides, faults, and floods. However, long‐term buried oil and gas pipelines often have corrosion defects, which bring greater challenges to the sa...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/ese3.830
Chaoqun Zeng, Jing-Pu Tang, Liangliang Wei, Miaochang Zhu et al. • Buildings
(2026)
Reinforced concrete (RC) beams strengthened with carbon-fabric-reinforced cementitious matrix (CFRCM) systems have shown potential for restoring flexural performance, yet their effectiveness under different corrosion levels remains insuffic...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/buildings16020377
Rubin Gulaboski • Macedonian Journal of Chemistry and Chemical Engineering
(2024)
Understanding energetics and electron behavior has been pivotal in elucidating numerous fundamental phenomena, including electricity, corrosion, respiration, energy generation in biological systems, intermolecular interactions within living...
DOAJ
Open Access (DOAJ)
DOI: 10.20450/mjcce.2024.2847
Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering
(2026)
Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s40712-026-00421-0
PENG Heng, DONG Minghui, ZHANG Maoqi, BAI Mingxian, GUO Jianwei • Cailiao Baohu
(2026)
Sealing is a core factor for the safe operation of high-pressure proton exchange membrane electrolysis cells(PEMECs).To investigate the corrosion behavior of sealing polymer materials,two experimental methods were established: an accelerate...
DOAJ
Open Access (DOAJ)
DOI: 10.16577/j.issn.1001-1560.2026.0015
Jose Fernando Florez Gomez, Songyang Chang, Irfan Ullah, Juan C. Velez Reyes et al. • Batteries
(2026)
The zinc–copper (Zn-Cu) voltaic battery is the first battery made in human history, but the Cu2+ dissolution issue leads to the reaction’s irreversibility. To tackle this challenge, solid-state electrolytes, ion exchange membranes, and func...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/batteries12060215
Guo-qiang Xu, Wei Zhang, Si Chen, Zhen-kai Zhu et al. • Case Studies in Construction Materials
(2024)
To investigate the impact of sulfate corrosion on the performance of shaft lining concrete under sustained compressive loads, this study immersed samples in a 10 % sodium sulfate solution after subjecting to sustained compressive loads of 0...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.cscm.2024.e03657
L. Gil, L. Jiménez, A. C. Castro, M. H. Staia et al. • Revista de Metalurgia
(2008)
La aleación de aluminio 7075-T6 es una aleación estructural ampliamente utilizada para aplicaciones aeronáuticas, debido a su alta relación entre resistencia mecánica y peso. Dependiendo de las condiciones ambientales, algunos mecanismos de...
DOAJ
Open Access (DOAJ)
DOI: 10.3989/revmetalm.2008.v44.i1.96
Ismat H. Ali, Mohammad I. Khan, Alhafez M. Alraih, Mohammed K. Almesfer et al. • International Journal of Electrochemical Science
(2021)
The current research aimed at investigating the potential corrosion inhibitory effect of essential oil extracted from Moringa peregrina leaves on carbon steel in acidic conditions. Gas chromatography (GC) and scanning electron microscope (S...
DOAJ
Open Access (DOAJ)
DOI: 10.20964/2021.08.49