Reset
Showing 20 of 26 academic articles

Analysis of Sustainable Guarantee Measures of Bauxite Resource Demand in China

Chunhuan LI, Huihui LYU, Zhihua LIAO, Alin CAO • Kuangchan zonghe liyong (2024)

This is an article in the field of mining engineering. The development of aluminum industry is subject to decisive factors such as bauxite resources. As a large aluminum industry country in the world, after nearly two decades of rapid devel...

DOAJ Open Access (DOAJ) DOI: 10.3969/j.issn.1000-6532.2024.05.017

Comparative investigation of similar and dissimilar AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced by continuous-drive friction welding

Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology (2026)

This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.09.145

Effect of Prior Rolling on Microstructures and Property of Diffusion-Bonded Mg/Al Alloy

Yunlong Ding, Jialian Shi, Dongying Ju • Advances in Materials Science and Engineering (2019)

In this study, magnesium alloy AZ91, which was cast by double roll casting system, was rolled by a rolling mill. Then, rolled magnesium alloy and magnesium alloy without being rolled were, respectively, welded with aluminum alloy 6061 by di...

DOAJ Open Access (DOAJ) DOI: 10.1155/2019/4535984

Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy

Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版 (2017)

Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...

DOAJ Open Access (DOAJ) DOI: 10.3969/J.ISSN.1000-5137.2017.06.006

Minimum and Full Fluidization Velocity for Alumina Used in the Aluminum Smelter

Paulo Douglas S. de Vasconcelos, André L. Amarante Mesquita • International Journal of Engineering Business Management (2011)

Fluidization is an engineering unit operation that occurs when a fluid (liquid or gas) ascends through a bed of particles, and these particles get a velocity of minimum fluidization V mf enough to stay in suspension, but without carrying th...

DOAJ Open Access (DOAJ) DOI: 10.5772/50943

Comparative Evaluation of the Antioxidant and Immunomodulatory Activities of Carrot (<i>Daucus carota</i> L.) Aerial Parts and Roots Using Different Extraction Methods

Sung-Sook Choi, Jae-Eun Lee, Hyo-Jun Lee, Kyung-Ae Lee • Foods (2025)

Carrot (Daucus carota L.) is a widely consumed root vegetable, yet its aerial parts, including leaves and stems, are typically discarded as agricultural by-products, despite their potential biological value. This study comparatively evaluat...

DOAJ Open Access (DOAJ) DOI: 10.3390/foods14233993

Nuclear Engineering in a Package

• Chemical & Engineering News (1958)

A FULLY EQUIPPED ATOMIC LABORATORY with instructions and experiments make up Nuclear-Chicago's new "packaged" nuclear engineering program for coDeges. First reactor from its production line will be installed at Northwestern University, Evan...

OPENALEX DOI: https://doi.org/10.1021/cen-v036n001.p108

The Thermomechanical Finite Element Analysis of 3003-H14 Plates Joined by the GMAW Process

Maribel Hernández, Ricardo R. Ambriz, Christian García, David Jaramillo • Metals (2020)

The gas metal arc welding (GMAW) process was used to weld 3003-H14 plates under restricted and unrestricted thermal expansion. Experimental and numerical analysis were conducted to determine the relation between weld thermal cycles and resi...

DOAJ Open Access (DOAJ) DOI: 10.3390/met10060708

Effect of Aluminum on Microstructure and High-Temperature Oxidation Resistance of Austenitic Heat-Resistant Steel

Chang Gu, Ruizhuo Liu, Chengduo Wang, Yufu Sun et al. • Metals (2020)

The ZG40Cr20Ni20Alx (x = 0, 1.76, 3.45, and 5.34) heat-resistant steel has been newly developed on the basis of HK40 steel for aggressive oxidizing environments. The results reveal that the Al greatly enhances the oxidation resistance of ZG...

DOAJ Open Access (DOAJ) DOI: 10.3390/met10020176

Development, modelling and optimization of process parameters on the tensile strength of aluminum, reinforced with pumice and carbonated coal hybrid composites for brake disc application

Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports (2024)

Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-024-67476-x

Hg Isotopes and Enhanced Hg Concentration in the Meishan and Guryul Ravine Successions: Proxies for Volcanism Across the Permian-Triassic Boundary

Alcides Nóbrega Sial, Jiubin Chen, Christoph Korte, Manoj Kumar Pandit et al. • Frontiers in Earth Science (2021)

High-resolution organic carbon isotope (δ13C), Hg concentration and Hg isotopes curves are presented for the Permian-Triassic boundary (PTB) sections at Guryul Ravine (India) and Meishan D (China). The total organic carbon (TOC)-normalized ...

DOAJ Open Access (DOAJ) DOI: 10.3389/feart.2021.651224

PENINGKATAN KUALITAS DENGAN PENDEKATAN SIX SIGMA DAN PERPEKTIF MBNQA SEBAGAI KRITERIA PRASYARAT BAKU MUTU PADA PT. TAMANACO

Aditya Apriawan Saputra • J@ti Undip: Jurnal Teknik Industri (2025)

Penelitian ini dilatarbelakangi oleh tingginya angka cacat produksi aluminium collapsible tube khususnya pada produk Kloderma 0.05% gel 5 gram Ø13,4 x 90 mm di PT. Tamanaco. Pada semester kedua tahun 2023, tingkat defect mencapai 8,81% (1.2...

DOAJ Open Access (DOAJ) DOI: 10.14710/jati.20.2.42-68

Vulsino volcanic aquifer in Umbria Region : Hydrogeological survey for the characterization of the presence of arsenic and aluminium and the correct use of groundwater

Stefano Fratini, Fabrizio Maria Francesconi, Roberto Checcucci, Francesco Frondini et al. • Acque Sotterranee (2013)

In December 2009 and the first months of 2010, a large water crisis took place in the Orvieto area, because of sudden high concentration of aluminum (Al) in the groundwater of the vulsino aquifer. This represents a supply for Orvieto’s popu...

DOAJ Open Access (DOAJ) DOI: 10.7343/as-048-13-0075

Effect of chemical treatment on the mechanical and thermal performance of flax fiber reinforced aluminium 6082 laminate: a machine learning-enhanced investigation

M. Vinod, B. S. Nithyananda, Shrishail B. Sollapur, Satish Gajbhiv et al. • Scientific Reports (2026)

Abstract This work examined the role of alkaline and epoxy-based surface chemical treatments on the mechanical and thermal properties of flax fiber reinforced Aluminum Alloy 6082 hybrid Fiber Metal Laminates (FMLs), integrated with machine ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-026-58852-w

Manufacturing of a New Generations from the Recycled AL Scrape Reinforced with AL2O3 - GNS Composite Powder by Vortex Technique for Automotive Spare Parts

Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development (2024)

This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...

DOAJ Open Access (DOAJ) DOI: 10.21608/ijisd.2024.302067.1074

Effects of Annealing and Deformation on Sagging Resistance of a Hot-Rolled, Four-Layered Al Alloy Clad Sheet

Minglong Kang, Li Zhou, Yunlai Deng, Jinqin Lei • Advances in Materials Science and Engineering (2021)

Multilayer brazeable aluminum alloy sheet is prone to collapse during high-temperature brazing process. The sagging resistance of the aluminum composite sheet needs to be further improved for quality control. Effects of annealing and rate o...

DOAJ Open Access (DOAJ) DOI: 10.1155/2021/6625548