Reset
Showing 20 of 8,605 academic articles

Information-analytical aspects of the reception organisation of powder microcomposites on an iron basis

A.V. LYULKO, V.V. GRITSENKO, B.B. JMAILOV, V.G. LYULKO • Вестник Донского государственного технического университета (2018)

The basic stages of a complex development direction of a science and practice of powder metallurgy as method of information-analytical representation of its basic aspects are presented. The basic algorithm of carrying out of operations and ...

DOAJ Open Access (DOAJ)

A hybrid nanomodulator enables metabolic microenvironment remodeling for potent immunotherapy against lung adenocarcinoma

Shuping Wang, Pengcheng Chen, Xiaozhen Jing, Jinglin Zou et al. • Materials & Design (2026)

STING agonist-based immunotherapy holds considerable promise for cancer treatment, yet its efficacy against immunologically “cold” tumors such as lung adenocarcinoma (LUAD) remains markedly limited. A major obstacle lies in the highly glyco...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2026.117182

Pressure Effects on Monolayer FeCl2: Above‐Room‐Temperature Ferromagnetism with In‐Plane Electric Polarization and Interface‐Free Magnetic Tunnel Junctions

Shubham Tyagi, Paresh C. Rout, Shubham Singh, Udo Schwingenschlögl • Advanced Electronic Materials (2026)

ABSTRACT We investigate the influence of hydrostatic pressure on the physical properties of monolayer FeCl2 for spintronics applications. A phase transition from a ferromagnetic half‐metal to a ferromagnetic semiconductor is unveiled at 4.6...

DOAJ Open Access (DOAJ) DOI: 10.1002/aelm.202500230

Lysosome blockade induces divergent metabolic programs in macrophages and tumours for cancer immunotherapy

Jing Ma, Ruijuan Ma, Xueke Zeng, Liming Zhang et al. • Journal of Experimental & Clinical Cancer Research (2023)

Abstract Background Platinum-drugs based chemotherapy in clinic increases the potency of tumor cells to produce M2 macrophages, thus leading to poor anti-metastatic activity and immunosuppression. Lysosome metabolism is critical for cancer ...

DOAJ Open Access (DOAJ) DOI: 10.1186/s13046-023-02768-0

Microstructure and corrosion behavior of SLM–Ti6Al4V with different fabrication angles in F−-containing solutions

Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报 (2021)

Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2020.09.29.001

A review on green synthesis of ZnO nanoparticles

Madhusmita Swain, Durgamadhab Mishra, Gourishankar Sahoo • Discover Applied Sciences (2025)

Abstract Nanoparticles and Nanostructured materials are playing an ever-important role in affordable healthcare, environment remediation, renewable energy, agriculture, consumer electronics, cosmetics etc. However, progress in these sectors...

DOAJ Open Access (DOAJ) DOI: 10.1007/s42452-025-06957-8

Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy

Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版 (2017)

Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...

DOAJ Open Access (DOAJ) DOI: 10.3969/J.ISSN.1000-5137.2017.06.006

The Evolution of COVID-19 Transmission with Superspreaders Class under Classical and Caputo Piecewise Operators: Real Data Perspective from India, France, and Italy

Shabir Ahmad, Salma Haque, Khalid Ali Khan, Nabil Mlaiki • Fractal and Fractional (2023)

In this study, we analyze the transmission of the COVID-19 model by using a piecewise operator in the classical Caputo sense. The existence along with the uniqueness of the solution of the COVID-19 model under a piecewise derivative is pres...

DOAJ Open Access (DOAJ) DOI: 10.3390/fractalfract7070501

Experimental study on unloading induced shear performances of 3D saw-tooth rock fractures

Qian Yin, Xinxin Nie, Jiangyu Wu, Qi Wang et al. • International Journal of Mining Science and Technology (2023)

A fractal model governing saw-tooth fractures was first introduced to replicate sandstone samples containing an inclined 3D penetrating rough fracture surface with various joint roughness coefficients (JRC). In conventional triaxial compres...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ijmst.2023.02.002

Finite element analysis on the near field properties of metallic cavities with atomic sharpness

Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics (2023)

Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2023.106360

The Coming of Materials Science

David A. Weitz • Physics Today (2002)

The Coming of Materials Science , Robert W. Cahn Pergamon, New York, 2001. $64.00 (568 pp.). isbn 0-08-042679-4 If one takes the broadest view, a significant fraction of modern-day physicists are materials scientists. Similarly, many chemis...

OPENALEX Open Access DOI: https://doi.org/10.1063/1.1496379

Phase-field models in materials science

Ingo Steinbach • Modelling and Simulation in Materials Science and Engineering (2009)

The phase-field method is reviewed against its historical and theoretical background. Starting from Van der Waals considerations on the structure of interfaces in materials the concept of the phase-field method is developed along historical...

OPENALEX DOI: https://doi.org/10.1088/0965-0393/17/7/073001

Materials Science and Engineering

Lashawn M. Gehrig, Xinyu Hu • Trans Tech Publications Ltd. eBooks (2023)

This edition presents the articles devoted mainly to materials processing technologies of steel and alloys, materials properties and advanced manufacturing technologies in the related fields of materials. All of them were selected from the ...

OPENALEX DOI: https://doi.org/10.4028/b-56k662